Adaptation of Delayed Position Feedback to the Reduction of Sway of Container Cranes

Files
thesis.pdf (2.64 MB)
Downloads: 411
TR Number
Date
2002-12-04
Journal Title
Journal ISSN
Volume Title
Publisher
Virginia Tech
Abstract

Cranes are increasingly used in transportation and construction. increasing demand and faster requirements necessitate better and more efficient controllers to guarantee fast turn-around time and to meet safety requirements. Container cranes are used extensively in ship-to-port and port-to-ship transfer operations.

In this work, we will extend the recently developed delayed position feedback controller to container cranes. In contrast with traditional work, which models a crane as a simple pendulum consisting of a hoisting cable and a lumped mass at its end, we have modeled the crane as a four-bar mechanism.

The actual configuration of the hoisting mechanism is significantly different from a simple pendulum. It consists typically of a set of four hoisting cables attached to four different points on the trolley and to four points on a spreader bar. The spreader bar is used to lift the containers. Therefore, the dynamics of hoisting assemblies of large container cranes are different from that of a simple pendulum. We found that a controller which treats the system as a four-bar mechanism has an improved response.

We developed a controller to meet the following requirements: traverse an 80-ton payload 50 m in 21.5 s, including raising the payload 15 m at the beginning and lowering the payload 15 m at the end of motion, while reducing the sway to 50 mm within 5.0 s at the end of the transfer maneuver. The performance of the controller has been demonstrated theoretically using numerical simulation. Moreover, the performance of the controller has been demonstrated experimentally using a 1/10th scale model. For the 1/10th scale model, the requirements translate into: traverse an 80 kg payload 5 m in 6.8 s, including raising 1.5 m at the beginning and lowering 1.5 m at the end of motion, while reducing the sway to 5 mm in under 1.6 s. The experiments validated the controller.

Description
Keywords
gantry crane, delayed feedback control, Container cranes, sway reduction
Citation
Collections