Browsing by Author "Clark, Matthew Taylor"

Now showing 1 - 2 of 2
  • Thumbnail Image
    The driven and stochastic dynamics of micro and nanoscale cantilevers in viscous fluid and near a solid boundary
    Clark, Matthew Taylor (Virginia Tech, 2008-10-24)
    Micro and nanoscale systems are rapidly evolving to improve the resolution of experimental measurements. Experiments involving such small scale devices are difficult and expensive, and the available analytical theory to describe their dynamics is idealized. The dynamics of microscopic cantilevers in fluid are complicated and include significant contributions from many sources in an actual experiment. Some examples are: complex cantilever geometries, near-wall effects, thermal and external actuation techniques, and a variety of measurement techniques. Numerical simulations are a powerful approach to describe the dynamics of micro and nanoscale systems for the precise conditions of experiment. This thesis provides a numerical approach capable of addressing these inherent challenges and quantifies the dynamics of microscopic cantilevers in fluid for experimentally relevant conditions. A thermodynamic approach based upon the fluctuation-dissipation theorem allows for the calculation of stochastic dynamics from deterministic dynamics. Using numerical simulations, the thermal motion can be described for the precise conditions of experiment. It is found that the measured dynamics of cantilevers differs depending on the quantity being measured. In particular, the dynamics of displacement and angle of the cantilever tip distribute energy differently to the higher flexural modes. The externally driven dynamics of microscale cantilevers in fluid are also considered. The driven dynamics are calculated using numerical simulations of the cantilever response to a force impulse. It is found that the driven dynamics depend upon the type of actuation in addition to the quantity measured. A comparison of the driven dynamics to the corresponding stochastic dynamics yields insight into the nature of the Brownian force acting on the cantilever. Another experimentally relevant condition is the use of cantilevers with V-shaped planforms in fluid. The resulting flow field is three-dimensional and complex in contrast to what is found for a long and slender rectangular cantilever. Despite the flow complexity, the stochastic and driven dynamics of the fundamental mode can be predicted using a two-dimensional model with an appropriately chosen length scale. An experimentally motivated magnetomotive actuation technique is investigated. Results show that this approach generates power spectra nearly equivalent to the noise spectra. Furthermore, the case of a V-shaped cantilever in fluid and oscillating in proximity of a solid boundary is investigated. In the presence of a solid surface the fluid damping and added mass of fluid on the cantilever are larger than for a cantilever far from boundaries. This results in a lower frequency and quality factor for the fundamental resonance. This can impede experimental efforts because broad peaks lack distinct features that can be used to identify experimental signals. An option to overcome the large viscous damping is to take advantage of higher modes of cantilever oscillation. The higher frequency oscillations of the higher modes generate a smaller viscous boundary layer and have a reduced added mass. As a result, the quality factor increases with increasing mode number. The frequency dependence of the fluid dynamics around a fluctuating microscale cantilever is also studied. The mass of fluid entrained by the cantilever and the viscous damping quantify the interaction of a cantilever with the surrounding fluid and are computed. Analytical expressions for these parameters are derived for moderate mode number. The techniques and findings of this thesis have broad applicability to a wide range of micro and nanotechnologies that rely upon understanding the dynamics of small scale structures in fluid.
  • Thumbnail Image
    The Stochastic Dynamics of an Array of Micron Scale Cantilevers in Viscous Fluid
    Clark, Matthew Taylor (Virginia Tech, 2006-07-24)
    The stochastic dynamics of an array of closely spaced micron scale cantilevers in a viscous fluid is considered. The stochastic cantilever dynamics are due to the constant buffeting of fluid particles by Brownian motion and the dynamics of adjacent cantilevers are correlated due to long range effects of fluid dynamics. The measurement sensitivity of an experimental setup is limited by the magnitude of inherent stochastic motion. However, the magnitude of this noise can be decreased using correlated measurements allowing for improved force resolution. A correlated scheme is proposed using two atomic force microscope cantilevers for the purpose of analyzing the dynamics of single molecules in real time, a regime that is difficult to observe using current technologies. Using a recently proposed thermodynamic approach the hydrodynamic coupling of an array of cantilevers is quantified for precise experimental conditions through deterministic numerical simulations. Results are presented for an array of two readily available micron-scale cantilevers yielding the possible force sensitivity and time resolution of correlated measurements. This measurement scheme is capable of achieving a force resolution that is more than three fold more sensitive than that of a single cantilever when the two cantilevers are separated by 200 nm, with a time scale on the order of tens of microseconds.