Browsing by Author "Lenth, Christopher Allen"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Investigations of flakeboard mat consolidation
    Lenth, Christopher Allen (Virginia Tech, 1994-10-05)
    The response of a flake mat to the mechanical stress applied during consolidation is a function of mat structure, raw material properties and the environmental conditions created during pressing. This research project was aimed at improving the understanding of raw material behavior during the hot-pressing of wood based composites by examining the response of a wood flake mat to the compression encountered during press closure in the flakeboard manufacturing process. The structure of a flakeboard mat can be considered to be that of a cellular material, the properties of which are governed by the cellular geometry, or arrangement of cells, and the properties of the solid cell wall material. A method for quantifying the cellular structure of a wood flake mat was developed and implemented. The structure of thin mat sections and small flake mats was quantified using image analysis techniques. The applicability of theories developed for modelling the compressive behavior of cellular materials to the consolidation of wood flake mats was investigated using thin mat sections. Narrow mat sections and small laboratory mats has similar void sizes but significantly different void shapes. Void size was not significantly affected by flake orientation, but void shape was.
  • Thumbnail Image
    Wood Material Behavior in Severe Environments
    Lenth, Christopher Allen (Virginia Tech, 1999-05-11)
    An improved knowledge of wood material behavior in hot-pressing environments can provide the benefit of an increased understanding of material properties during the manufacture of wood-based composites as well as insight into the development of new processes and products which manipulate the viscoelastic nature of wood. Two specific areas where additional knowledge is needed are: the high temperature equilibrium moisture content (EMC) behavior and the moisture dependent softening behavior. EMC data was collected and desorption isotherms were generated for mature and juvenile wood of aspen, loblolly pine and yellow-poplar at 50 and 160°C. High temperature EMC behavior was found to be distinct from that at lower temperatures, and considerable differences between the isotherms for juvenile and mature wood were detected. Substantial thermal degradation was observed during desorption at 160 °C and found to be strongly influenced by relative humidity. The thermal softening behavior of wood was evaluated using dielectric thermal analysis (DETA) at moisture levels from 0 to 20 percent. Coincident in situ relaxations of hemicellulose and amorphous cellulose in the range of 20 to 200 °C were observed and found to exhibit the characteristics of a secondary (glass) transition. The moisture dependence of this transition was characterized, and differences in the observed Tg were detected between juvenile and mature wood. Time-temperature superposition was also shown to be applicable to the wood-water system.