Browsing by Author "Tahmasian, Sevak"
Now showing 1 - 5 of 5
Results Per Page
Sort Options
- Control of Periodic Systems Governed by Partial Differential Equations Using AveragingTahmasian, Sevak (Virginia Tech, 2023-10-04)As a perturbation method, averaging is a mathematical tool for dynamic analysis of time-periodic and space-periodic dynamical systems, including those governed by partial differential equations. The control design procedure presented in this work uses averaging techniques, the well-developed linear control strategies, and finite element methods. The controller is designed based on the linear averaged dynamics of a time- or space-periodic system. The controller is then used for trajectory tracking or stabilization of the periodic system. The applicability and performance of the suggested method depend on different physical parameters of the periodic system and the control parameters of the controller. The effects of these parameters are discussed in this work. Numerical simulations show acceptable performance of the proposed control design strategy for two linear and nonlinear time- and space-periodic systems, namely, the one-dimensional heat equation and the Chafee-Infante equation with periodic coefficients.
- Design, Analysis, and Optimization of Vibrational Control StrategiesTahmasian, Sevak (Virginia Tech, 2015-05-22)This dissertation presents novel vibrational control strategies for mechanical control-affine systems with high-frequency, high-amplitude inputs. Since these control systems use high-frequency, zero-mean, periodic inputs, averaging techniques are widely used in the analysis of their dynamics. By studying their time-averaged approximations, new properties of the averaged dynamics of this class of systems are revealed. Using these properties, the problem of input optimization of vibrational control systems was formulated and solved by transforming the problem to a constrained optimization one. Geometric control theory provides powerful tools for studying the control properties of control-affine systems. Using the concepts of vibrational and geometric controls and averaging tools, a closed-loop control strategy for trajectory tracking of a class of underactuated mechanical control-affine systems is developed. In the developed control law, the fact that for underactuated systems, the actuated coordinates together with the corresponding generalized velocities can be considered as generalized inputs for the unactuated dynamics plays the main role. Using the developed control method, both actuated and unactuated coordinates of the system are able to follow slowly time-varying prescribed trajectories on average. The developed control method is applied for altitude control of flapping wing micro-air vehicles by considering the sweeping (flapping) angle of the wings as the inputs. Using the feathering (pitch) angles of the wings as additional inputs, and using non-symmetric flapping, the control method is then extended for three-dimensional flight control of flapping wing micro-air vehicles.
- Dynamic Analysis and Design Optimization of a Drag-Based Vibratory SwimmerTahmasian, Sevak; Jafaryzad, Arsam; Bulzoni, Nicolas L.; Staples, Anne E. (MDPI, 2020-03-22)Many organisms achieve locomotion via reciprocal motions. This paper presents the dynamic analysis and design optimization of a vibratory swimmer with asymmetric drag forces and fluid added mass. The swimmer consists of a floating body with an oscillatory mass inside. One-dimensional oscillations of the mass cause the body to oscillate with the same frequency as the mass. An asymmetric rigid fin attached to the bottom of the body generates asymmetric hydrodynamic forces, which drive the swimmer either backward or forward on average, depending on the orientation of the fin. The equation of motion of the system is a time-periodic, piecewise-smooth differential equation. We use simulations to determine the hydrodynamic forces acting on the fin and averaging techniques to determine the dynamic response of the swimmer. The analytical results are found to be in good agreement with vibratory swimmer prototype experiments. We found that the average unidirectional speed of the swimmer is optimized if the ratio of the forward and backward drag coefficients is minimized. The analysis presented here can aid in the design and optimization of bio-inspired and biomimetic robotic swimmers. A magnetically controlled microscale vibratory swimmer like the one described here could have applications in targeted drug delivery.
- Hydroacoustic Parametric Study of Pile Driving-Induced Anthropogenic SoundWojciechowski, Shannon (Virginia Tech, 2024-06-04)Anthropogenic sound in Florida's waters and coastal waterways is most commonly caused by overwater development, marine traffic, and military activity. Overwater construction has increased over the years as a result of aging infrastructure and rising expansions around the United States, including more than forty US Naval facilities containing tens of thousands of feet of pier. Construction methodology, such as pile driving, has risen in shallow waters to build structures such as bridges, piers, and wind farms, with significant consequences for marine life and the environment. More precisely, pile driving activities generate significant decibel levels in the surrounding marine environment. Measurements taken from hydrophones placed in the water near the construction site indicate that the high sound pressure levels produced may be harmful to marine life and the environment. As a result, standards have been established to help alleviate and decrease the possible harm that high decibel sound levels may produce. However, these additional steps increase the overall cost of the construction project. This thesis focuses on replicating the pile driving process using finite element modeling to hydroacoustic parametric study of pile driving-induced anthropogenic sound in neighboring Florida seas, as well as the possible environmental impact of the state's numerous naval base piers. The modeling predictions can then be used to identify the distance from the pile at which marine life and the environment are no longer adversely affected. In addition, computer modeling can reduce construction costs when compared to on-site sensors and monitoring.
- Theoretical Parametric Study of Through-Wall Acoustic Energy Transfer SystemsWinnard, Thomas Johan (Virginia Tech, 2021-05-19)Technological advances require novel solutions for contactless energy transfer. Many engineering applications require unique approaches to power electrical components without using physical wires. In the past decade, awareness of the need to wirelessly power electrical components spawned many forays into the field of wireless power transfer (WPT). WPT techniques include capacitive energy transfer, electromagnetic inductive power transfer, electromagnetic radiative power transfer, electrostatic induction, and acoustic energy transfer. Acoustic energy transfer (AET) has many advantages over other methods. These advantages include lower operating frequency, shorter wavelengths enabling the use of smaller sized receiver and transmitter, extended transmitter-to-receiver distance therefore more manageable design constraints, achieving lower attenuation, higher penetration depth, and no electromagnetic losses. Most AET systems operate in the ultrasonic frequency range and are more commonly referred to as ultrasonic acoustic energy transfer (UAET) systems. Through-wall UAET systems are constructed of a transmitter bonded to a transmission elastic layer, which in turn is bonded to a receiver. The transmitter and receiver layers are constructed of a piezoelectric material. Piezoelectric materials behave according to the piezoelectric effect, which is when a material generates an electric charge in response to mechanical strain. The transmitter utilizes the reverse of the piezoelectric effect. A sinusoidal input voltage is applied to the transmitter, inducing vibrations in the transmitter. The vibration-induced acoustic waves emanating from the transmitter travel through the initial bonding layer, the transmission layer, and the final bonding layer to the receiver. In turn, the acoustic waves cause the receiver to deform and undergo strain. This induces a flow of charge in the receiver, which is an electric current. The receiver feeds current to a resistive load. In this manner, energy is acoustically transferred between two transducers without wires. The performance of UAET systems can be evaluated based on power transfer efficiency, voltage magnification, and input admittance. UAET systems require extensive modeling before experimental assembly can be attempted. The analytical models of UAET are either based on the mechanics of the constitutive relations of piezoelectricity and solid mechanics or using equivalent circuit methods. The equivalent circuit method approximates the physics of the UAET system with electrical assumptions. The mechanics-based method is the most comprehensive description of the physics of all the intermediate layers in a UAET system. The mechanics-based method has been based on the assumption that the UAET system is operated in the thickness mode of vibration, i.e., piston-like vibration mode where the transmitter and receiver disks vibrate only in the thickness direction. This poses an issue for disks with aspect ratios between 0.1 and 20 because the piezoelectric transducers vibrate in both the radial and thickness modes. In addition to this assumption, most of the works on UAET models only have accounted for the piezoelectric and transmission layers. The effects of the bonding layers were not considered. Bonding the piezoelectric layers to the transmission layer introduces epoxy material with mechanical properties that are not accounted for. The epoxy layers are extra barriers to the transmission that introduce attenuation and alter the vibrational and acoustical behaviors of the UAET system. Investigations into UAET commonly focus on metal through-wall applications. Alternate transmission layer materials are not investigated and the impact of varying mechanical properties on the performance of a through-wall UAET system has not been comprehensively studied. Even with the metal transmission layers, the impact of the metal thickness has not been extensively investigated thoroughly. This work addresses the issues of the thickness-mode assumption in UAET modeling, the effects of epoxy layers, the impacts of the metal layer geometry, and the performance of UAET systems with alternate transmission layer materials. Particularly, (1) we showed that the thickness-mode assumption, that has been used in the UAET modeling leads to inaccurate results. (2) We modified the available acoustic electro- elastic theoretical modeling to include the effects of radial modes as well as the epoxy bonding layers. (3) We showed that the geometry of the elastic/metal layer requires optimization for peak system efficiency. (4) The results show that using alternate transmission layer materials impacts the performance of UAET systems. The results of this work were investigated using an improved 5-layer analytical model and finite element modeling in COMSOL Multiphysics.