Strategic Growth Areas (SGAs)

Permanent URI for this community

https://hdl.handle.net/10919/79468

Similar to Destination Areas in structure, Strategic Growth Areas are smaller and aim for regional or national leadership. Strategic Growth Areas represent additional areas of strength, identified by a faculty survey conducted in January 2016. SGAs may mature into Destination Areas.

Browse

Now showing 1 - 20 of 272

3D Bioprinted Human Skeletal Muscle Constructs for Muscle Function Restoration
Kim, Ji Hyun; Seol, Young-Joon; Ko, In Kap; Kang, Hyun-Wook; Lee, Young Koo; Yoo, James J.; Atala, Anthony; Lee, Sang Jin (Springer Nature, 2018-08-17)
A bioengineered skeletal muscle tissue as an alternative for autologous tissue flaps, which mimics the structural and functional characteristics of the native tissue, is needed for reconstructive surgery. Rapid progress in the cell-based tissue engineering principle has enabled in vitro creation of cellularized muscle-like constructs; however, the current fabrication methods are still limited to build a three-dimensional (3D) muscle construct with a highly viable, organized cellular structure with the potential for a future human trial. Here, we applied 3D bioprinting strategy to fabricate an implantable, bioengineered skeletal muscle tissue composed of human primary muscle progenitor cells (hMPCs). The bioprinted skeletal muscle tissue showed a highly organized multi-layered muscle bundle made by viable, densely packed, and aligned myofiber-like structures. Our in vivo study presented that the bioprinted muscle constructs reached 82% of functional recovery in a rodent model of tibialis anterior (TA) muscle defect at 8 weeks of post-implantation. In addition, histological and immunohistological examinations indicated that the bioprinted muscle constructs were well integrated with host vascular and neural networks. We demonstrated the potential of the use of the 3D bioprinted skeletal muscle with a spatially organized structure that can reconstruct the extensive muscle defects.
3D printing of lignin: Challenges, opportunities and roads onward
Ebers, L. -S.; Arya, Aditi; Bowland, C. C.; Glasser, Wolfgang G.; Chmely, S. C.; Naskar, A. K.; Laborie, Marie-Pierre Genevieve (2021-06)
As the second most abundant biopolymer on earth, and as a resource recently becoming more available in separated and purified form on an industrial scale due to the development of new isolation technologies, lignin has a key role to play in transitioning our material industry towards sustainability. Additive manufacturing (AM), the most efficient-material processing technology to date, has likewise made great strides to promote sustainable industrial solutions to our needs in engineered products. Bringing lignin research to AM has prompted the emergence of the nascent "lignin 3D printing" field. This review presents the recent state of art of this promising field and highlights its challenges and opportunities. Following a review of the industrial availability, molecular attributes, and associated properties of technical lignins, we review R&D efforts at implementing lignin systems in extrusion-based and stereolithography (SLA) printing technologies. Doing so underlines the adage of lignin research that "all lignins are not created equal," and stresses the opportunity nested in this chemical diversity created mostly by differences in isolation conditions to molecularly select and tune the attributes of technical lignin systems towards desirable properties, be it by modification or polymer blending. Considering the AM design process in its entirety, we finally propose onward routes to bring the full potential to this emerging field. We hope that this review can help promote the unique value and overdue industrial role of lignin in sustainable engineered materials and products.
3D Sketching and Flexible Input for Surface Design: A Case Study
Leal, Anamary; Bowman, Douglas A. (Brazilian Computing Society (SBC), 2014)
Designing three-dimensional (3D) surfaces is difficult in both the physical world and in 3D modeling software, requiring background knowledge and skill. The goal of this work is to make 3D surface design easier and more accessible through natural and tangible 3D interaction, taking advantage of users' proprioceptive senses to help them understand 3D position, orientation, size, and shape. We hypothesize that flexible input based on fabric may be suitable for 3D surface design, because it can be molded and folded into a desired shape, and because it can be used as a dynamic flexible brush for 3D sketching. Fabric3D, an interactive surface design system based on 3D sketching with flexible input, explored this hypothesis. Through a longitudinal five-part study in which three domain experts used Fabric3D, we gained insight into the use of flexible input and 3D sketching for surface design in various domains.
Access to Autism Spectrum Disorder Services for Rural Appalachian Citizens
Scarpa, Angela; Jensen, Laura S.; Gracanin, Denis; Ramey, Sharon L.; Dahiya, Angela V.; Ingram, L. Maria; Albright, Jordan; Gatto, Alyssa J.; Scott, Jen Pollard; Ruble, Lisa (2020-01)
Background: Low-resource rural communities face significant challenges regarding availability and adequacy of evidence-based services. Purposes: With respect to accessing evidence-based services for Autism Spectrum Disorder (ASD), this brief report summarizes needs of rural citizens in the South-Central Appalachian region, an area notable for persistent health disparities. Methods: A mixed-methods approach was used to collect quantitative and qualitative data during focus groups with 33 service providers and 15 caregivers of children with ASD in rural southwest Virginia. Results: Results supported the barriers of availability and affordability of ASD services in this region, especially relating to the need for more ASD-trained providers, better coordination and navigation of services, and addition of programs to assist with family financial and emotional stressors. Results also suggested cultural attitudes related to autonomy and trust towards outside professionals that may prevent families from engaging in treatment. Implications: Relevant policy recommendations are discussed related to provider incentives, insurance coverage, and telehealth. Integration of autism services into already existing systems and multicultural sensitivity of providers are also implicated.
An Adaptive Actuation Mechanism for Anthropomorphic Robot Hands
Kontoudis, George P.; Liarokapis, Minas; Vamvoudakis, Kyriakos G.; Furukawa, Tomonari (Frontiers, 2019-07-05)
This paper presents an adaptive actuation mechanism that can be employed for the development of anthropomorphic, dexterous robot hands. The tendon-driven actuation mechanism achieves both flexion/extension and adduction/abduction on the finger's metacarpophalangeal joint using two actuators. Moment arm pulleys are employed to drive the tendon laterally and achieve a simultaneous execution of abduction and flexion motion. Particular emphasis has been given to the modeling and analysis of the actuation mechanism. More specifically, the analysis determines specific values for the design parameters for desired abduction angles. Also, a model for spatial motion is provided that relates the actuation modes with the finger motions. A static balance analysis is performed for the computation of the tendon force at each joint. A model is employed for the computation of the stiffness of the rotational flexure joints. The proposed mechanism has been designed and fabricated with the hybrid deposition manufacturing technique. The efficiency of the mechanism has been validated with experiments that include the assessment of the role of friction, the computation of the reachable workspace, the assessment of the force exertion capabilities, the demonstration of the feasible motions, and the evaluation of the grasping and manipulation capabilities. An anthropomorphic robot hand equipped with the proposed actuation mechanism was also fabricated to evaluate its performance. The proposed mechanism facilitates the collaboration of actuators to increase the exerted forces, improving hand dexterity and allowing the execution of dexterous manipulation tasks.
Additive manufacturing of complex micro-architected graphene aerogels
Hensleigh, Ryan M.; Cui, Huachen; Oakdale, James S.; Ye, Jianchao C.; Campbell, Patrick G.; Duoss, Eric B.; Spadaccini, Christopher M.; Zheng, Xiaoyu; Worsley, Marcus A. (Royal Society of Chemistry, 2018-08-13)
3D graphene foams exhibit immense degradation of mechanical properties. Micro-architecture can alleviate this problem, but no current technique meets the manufacturing requirements. Herein we developed a light-based 3D printing process to create hierarchical graphene structures with arbitrary complexity and order-of-magnitude finer features, showing enhanced mechanical properties at decreasing density.
Addressing Inequality: The First Step Beyond COVID-19 and Towards Sustainability
Ashford, Nicholas A.; Hall, Ralph P.; Arango-Quiroga, Johan; Metaxas, Kyriakos A.; Showalter, Amy L. (MDPI, 2020-07-03)
The COVID-19 pandemic has impacted billions of lives across the world and has revealed and worsened the social and economic inequalities that have emerged over the past several decades. As governments consider public health and economic strategies to respond to the crisis, it is critical they also address the weaknesses of their economic and social systems that inhibited their ability to respond comprehensively to the pandemic. These same weaknesses have also undermined efforts to advance equality and sustainability. This paper explores over 30 interventions across the following nine categories of change that hold the potential to address inequality, provide all citizens with access to essential goods and services, and advance progress towards sustainability: (1) Income and wealth transfers to facilitate an equitable increase in purchasing power/disposable income; (2) broadening worker and citizen ownership of the means of production and supply of services, allowing corporate profit-taking to be more equitably distributed; (3) changes in the supply of essential goods and services for more citizens; (4) changes in the demand for more sustainable goods and services desired by people; (5) stabilizing and securing employment and the workforce; (6) reducing the disproportionate power of corporations and the very wealthy on the market and political system through the expansion and enforcement of antitrust law such that the dominance of a few firms in critical sectors no longer prevails; (7) government provision of essential goods and services such as education, healthcare, housing, food, and mobility; (8) a reallocation of government spending between military operations and domestic social needs; and (9) suspending or restructuring debt from emerging and developing countries. Any interventions that focus on growing the economy must also be accompanied by those that offset the resulting compromises to health, safety, and the environment from increasing unsustainable consumption. This paper compares and identifies the interventions that should be considered as an important foundational first step in moving beyond the COVID-19 pandemic and towards sustainability. In this regard, it provides a comprehensive set of strategies that could advance progress towards a component of Sustainable Development Goal (SDG) 10 to reduce inequality within countries. However, the candidate interventions are also contrasted with all 17 SDGs to reveal potential problem areas/tradeoffs that may need careful attention.
Adsorbing/dissolving Lyoprotectant Matrix Technology for Non-cryogenic Storage of Archival Human Sera
Solivio, Morwena J.; Less, Rebekah; Rynes, Mathew L.; Kramer, Marcus; Aksan, Alptekin (Springer Nature, 2016-04-12)
Despite abundant research conducted on cancer biomarker discovery and validation, to date, less than two-dozen biomarkers have been approved by the FDA for clinical use. One main reason is attributed to inadvertent use of low quality biospecimens in biomarker research. Most proteinaceous biomarkers are extremely susceptible to pre-analytical factors such as collection, processing, and storage. For example, cryogenic storage imposes very harsh chemical, physical, and mechanical stresses on biospecimens, significantly compromising sample quality. In this communication, we report the development of an electrospun lyoprotectant matrix and isothermal vitrification methodology for non-cryogenic stabilization and storage of liquid biospecimens. The lyoprotectant matrix was mainly composed of trehalose and dextran (and various low concentration excipients targeting different mechanisms of damage), and it was engineered to minimize heterogeneity during vitrification. The technology was validated using five biomarkers; LDH, CRP, PSA, MMP-7, and C3a. Complete recovery of LDH, CRP, and PSA levels was achieved post-rehydration while more than 90% recovery was accomplished for MMP-7 and C3a, showing promise for isothermal vitrification as a safe, efficient, and low-cost alternative to cryogenic storage.
Adsorption of Xyloglucan onto Thin Films of Cellulose Nanocrystals and Amorphous Cellulose: Film Thickness Effects
Kittle, Joshua D.; Qian, Chen; Edgar, Emma; Roman, Maren; Esker, Alan R. (American Chemical Society, 2018-10-01)
The interaction between cellulose and hemicelluloses is of fundamental importance for understanding the molecular architecture of plant cell walls. Adsorption of xyloglucan (XG) onto regenerated cellulose (RC), sulfated cellulose nanocrystal (s-CNC), and desulfated cellulose nanocrystal (d-CNC) films was studied by quartz crystal microbalance with dissipation monitoring, surface plasmon resonance, and atomic force microscopy. The amount of XG adsorbed onto different cellulose substrates increased in the order RC < s-CNC < d-CNC. The adsorption of XG onto RC films was independent of film thickness (d), whereas XG adsorption was weakly dependent on d for s-CNC films and strongly dependent on d for d-CNC films. However, approximately the same amount of XG adsorbed onto “monolayer-thin” films of RC, s-CNC, and d-CNC. These results suggest that the morphology and surface charge of the cellulose substrate played a limited role in XG adsorption and highlight the importance of film thickness of cellulose nanocrystalline films to XG adsorption.
Aesthetics of Otherness: Representation of #migrantcaravan and #caravanamigrante on Instagram
Rosa, Fernanda R.; Soto-Vasquez, Arthur D. (Sage, 2022-01)
This article examines the representation of the migrant caravan on Instagram showing how an aesthetics of otherness has prevailed in this representation. Aesthetics of otherness is the result of the interaction between platform users' selections and platform affordances that creates a gap between the marginalized other and the user. Based on a qualitative content analysis of posts with the hashtags #caravanamigrante and #migrantcaravan, this research reveals that the two hashtags form parallel, although not alike, communicative spaces where migrant caravan representation is mostly mediated by professionals and organizations interested in promoting their own work and not by the migrants themselves. Despite this trend, users posting with #caravanamigrante were less likely to hijack the intent of the public, more likely to reference reasons for migration, and overall less likely to employ the aesthetics of otherness, which point to the possibility of circumventing the role of the platform in shaping the representation of marginalized people and social justice movements.
Ageism and Feminism: From “Et Cetera” to Center
Calasanti, Toni M.; Slevin, Kathleen F.; King, Neal M. (Indiana University Press, 2006)
Although women’s studies scholars and activists do not deny the reality of ageism, they have relegated it to secondary status, neglecting to theorize age relations or place old age at the center of analysis. After explaining what we mean by age relations and their intersections with other inequalities, we discuss the ways in which old people are oppressed, and why age relations represent a political location that needs to be addressed in its own right. We then demonstrate ways in which feminist theories and activism might change if the focus shifted to old people.
Ageism and the counseling profession: Causes, consequences, and methods for counteraction
Fullen, Matthew C. (2018)
As the number of older adults increases, it is important to understand how attitudes toward aging influence society, the aging process, and the counseling profession. Ageism—defined as social stigma associated with old age or older people—has deleterious effects on older adults’ physical health, psychological wellbeing, and self-perception. In spite of research indicating that the pervasiveness of ageism is growing, there are few studies, whether conceptual or empirical, related to the impact of ageism within the practice of counseling. This article includes an overview of existing literature on the prevalence and impact of ageism, systemic and practitioner-level consequences of ageism, and specific implications for the counseling profession. Discussion of how members of the counseling profession can resist ageism within the contexts of counselor education, gerontological counseling, advocacy, and future research will be addressed.
Aging in Flood-Prone Coastal Areas: Discerning the Health and Well-Being Risk for Older Residents
Bukvic, Anamaria; Gohlke, Julia M.; Borate, Aishwarya; Suggs, Jessica (MDPI, 2018-12-18)
Coastal communities are increasingly exposed to more intense and frequent hurricanes, accelerated sea-level rise, and prolonged tidal inundation, yet they are often a preferred retirement destination for older adults vulnerable to flooding and extreme weather events. The unique physical and psychosocial challenges of older population age 65 and over may affect their level of preparedness, capacity to cope with, and ability to respond and recover from a hazard event. Despite the clear vulnerabilities of older residents living in high-risk areas when compared to younger coastal populations, there is a lack of empirical research on the integrated flood risks to this population group in the coastal context. This paper provides a holistic assessment of this emerging problem along the U.S. East Coast by measuring the exposure of older population to sea level rise and storm surge in coastal counties. It further evaluates how age-related vulnerabilities differ between rural and urban settings using the case study approach and geospatial and statistical analysis the paper also conducts a review of scientific literature to identify gaps in the current understanding of health and well-being risks to aging populations in coastal communities. The results show that older populations are unevenly distributed along the U.S. East Coast with some states and counties having significantly higher percent of residents age 65 and older living along the shoreline. Many places with larger older populations have other attributes that further shape the vulnerability of this age group such as older housing stock, disabilities, and lower income and that often differ between rural and urban settings. Lastly, our study found that vast majority of research on aging in high-risk coastal locations has been conducted in relation to major disasters and almost none on the recurrent nuisance flooding that is already affecting many coastal communities.
Almost Everything We Need to Better Serve Children of the Opioid Crisis We Learned in the 80s and 90s
Horn, Kimberly A.; Pack, Robert P.; Trestman, Robert L.; Lawson, Gerard F. (Frontiers, 2018-10-16)
Opioid use disorder impedes dependent parents' abilities to care for their children. In turn, children may languish in unpredictability and persistent chaos. Societal responses to these children are often guided by a belief that unless the drug dependent parent receives treatment, there is little help for the child. While a preponderance of the drug dependence research is adult-centric, a significant body of research demonstrates the importance of not only addressing the immediate well being of the children of drug dependent caregivers but preventing the continuing cycle of drug dependence. The present commentary demonstrates through a brief review of the US history of drug dependence crises and research from the 1980s and 1990s, a range of "tried and true" family, school, and community interventions centered on children. We already know that these children are at high risk of maladjustment and early onset of drug dependence; early intervention is critical; multiple risk factors are likely to occur simultaneously; comprehensive strategies are optimal; and multiple risk-focused strategies are most protective. Where we need now to turn our efforts is on how to effectively implement and disseminate best practices, many of which we learned in the 1980s and 1990s. The greatest opportunity in both changing the nature of the opioid epidemic at scale and influencing rapid translation of existing research findings into policy and practice is not in asking what to do, but in asking how to do the right things well, and quickly.
Ambient ammonia synthesis via palladium-catalyzed electrohydrogenation of dinitrogen at low overpotential
Wang, Jun; Yu, Liang; Hu, Lin; Chen, Gang; Xin, Hongliang; Feng, Xiaofeng (Springer Nature, 2018-05-15)
Electrochemical reduction of N2 to NH3 provides an alternative to the Haber−Bosch process for sustainable, distributed production of NH3 when powered by renewable electricity. However, the development of such process has been impeded by the lack of efficient electrocatalysts for N2 reduction. Here we report efficient electroreduction of N2 to NH3 on palladium nanoparticles in phosphate buffer solution under ambient conditions, which exhibits high activity and selectivity with an NH3 yield rate of ~4.5 μg mg−1Pd h−1 and a Faradaic efficiency of 8.2% at 0.1 V vs. the reversible hydrogen electrode (corresponding to a low overpotential of 56 mV), outperforming other catalysts including gold and platinum. Density functional theory calculations suggest that the unique activity of palladium originates from its balanced hydrogen evolution activity and the Grotthuss-like hydride transfer mechanism on α-palladium hydride that lowers the free energy barrier of N2 hydrogenation to *N2H, the rate-limiting step for NH3 electrosynthesis.
Amphiphilic hydroxyalkyl cellulose derivatives for amorphous solid dispersion prepared by olefin cross-metathesis
Dong, Yifan; Mosquera-Giraldo, Laura I.; Troutman, Jacob; Skogstad, Brittny; Taylor, Lynne S.; Edgar, Kevin J. (Royal Society of Chemistry, 2016-07-07)
Olefin cross-metathesis (CM) has enabled design and synthesis of diverse, amphiphilic cellulose ether derivatives (e.g. of ethyl and methyl cellulose). In this paper, hydroxyalkyl cellulose was selected as a hydrophilic starting material, with the additional advantage that it has DS (OH) 3.0 that allows targeting of a full range of DS of selected functional groups. Hydroxypropyl cellulose (HPC) was first etherified with 5-bromopent-1-ene to attach olefin “handles” for metathesis, whereby control of molar ratios of sodium hydride and 5-bromopent-1-ene permits full DS control of appended olefin. These olefin-terminated HPC ethers then were subjected to CM with acrylic acid and different acrylates, followed by diimide hydrogenation to reduce the resulting α,β-unsaturation. NMR and FT-IR spectroscopies were useful tools for following reaction progress. One of the product carboxyl-functionalized HPC derivatives, designated HPC-Pen106-AA-H, showed high promise as a crystallization inhibitor of the antiviral drug telaprevir. Its nucleation-induction inhibitory ability was compared to those of commercial controls, HPC and HPMCAS. All three polymers were very effective for inhibiting telaprevir crystallization, increasing induction time up to 8-fold. HPC did not effectively prevent amorphous particle growth, whereas the carboxyl-containing HPC-Pen106-AA-H and HPMCAS were able to prevent formation of agglomerates of amorphous drugs.
Analysis of electricity consumption: a study in the wood products industry
Quesada, Henry Jose; Wiedenbeck, Janice K.; Bond, Brian H. (2016-10)
This paper evaluates the effect of industry segment, year, and US region on electricity consumption per employee, per dollar sales, and per square foot of plant area for wood products industries. Data was extracted from the Industrial Assessment Center (IAC) database and imported into MS Excel. The extracted dataset was examined for outliers and abnormalities with outliers outside the quantile range 0.5-99.5 dropped from the analysis. A logarithmic transformation was applied to eliminate the skewness of the original data distributions. Correlation measurements indicated a moderate association between the response variables; therefore, a multivariate analysis of variance test was performed to measure the impact of the three factors: industry type, year, and region, simultaneously on all response variables. The results indicated some effect associated with all three factors on the three measures of electricity consumption. Subsequently, univariate ANOVA tests were conducted to determine the levels of the factors that were different. Most levels of industry type were associated with significantly different energy consumption, an expected result since some of the industries are more energy intensive than others. The industries in Standard Industry Code (SIC) 2493 (reconstituted wood products) are the groups with the highest electricity consumption with means of 38,096.28 kWh/employee, 0.86 kWh/sales, and 154.14 kWh/plant area while industries grouped in SIC 2451 (mobile homes) have the smallest consumption with means of 6811.01 kWh/employee, 0.05 kWh/sales, and 9.45 kWh/plant area. Interestingly, differences in regional consumption were found to be linked to the proportion of industry types by region. Data analysis also indicated differences in electricity consumption per employee for the factor year, but for the other response variables, no differences were found. These main results indicate that industries in the wood products sector have different electricity consumption rates depending on the type of manufacturing processes they use. Therefore, industries in this sector can use these comparisons and metrics to benchmark their electricity consumption as well to understand better how electricity costs might vary depending on the region they are located.
An Analysis of Social Vulnerability to Natural Hazards in Nepal Using a Modified Social Vulnerability Index
Aksha, Sanam K.; Juran, Luke; Resler, Lynn M.; Zhang, Yang (2018-11-16)
Social vulnerability influences the ability to prepare for, respond to, and recover from disasters. The identification of vulnerable populations and factors that contribute to their vulnerability are crucial for effective disaster risk reduction. Nepal exhibits multihazard risk and has experienced socioeconomic and political upheaval in recent decades, further increasing susceptibility to hazards. However, we still know little regarding social vulnerability in Nepal. Here, we investigate social vulnerability in Nepal by adapting Social Vulnerability Index (SoVI) methods to the Nepali context. Variables such as caste, and populations who cannot speak/understand Nepali were added to reflect the essence of the Nepali context. Using principal component analysis, 39 variables were reduced to seven factors that explained 63.02% of variance in the data. Factor scores were summarized to calculate final SoVI scores. The highest levels of social vulnerability are concentrated in the central and western Mountain, western Hill, and central and eastern Tarai regions of Nepal, while the least vulnerable areas are in the central and eastern Hill regions. These findings, supplemented with smaller-scale analyses, have the potential to assist village officers, policymakers, and emergency managers in the development of more effective and geographically targeted disaster management programs.
The Application Of Bio-inspiration To Human-centered Product Design
Kennedy, B. (WIT Press, 2014)
Biologically inspired design is an emerging practice based on the premise that nature holds a vast library of strategies, processes and technologies that can lead to innovative, sustainable solutions to human problems. Around the globe, scientific and engineering research efforts in Bio-inspiration have made astonishing discoveries that have impacted future possibilities in the fields of robotics, biomedical technology and material science, amongst many other examples. Yet, despite rising evidence about Biology’s relevance to innovative design, examples demonstrating specifics about how it can be applied in the near term in consumer product design are limited. This paper presents a case study wherein Bio-inspired design was used successfully as a tool to help develop novel, viable and product concepts for a packaged-goods industry client. Specifically, emphasis will be placed on how the method of ‘biologizing the problem’ contributed to redefining the parameters of the challenge, which ultimately drove the project’s success. After receiving a focused brief for reinventing the generally unpleasant experience of bathroom shower cleaning, the first round of creative ideation yielded incremental solutions based on the goal of ‘mildew removal and extermination.’ During the second round of creative ideation, after the problem had been redefined in terms of biological strategies, an entirely different set of solutions resulted from a revised goal of ‘mildew prevention.’ Such examples of problem redefinition can be propelled by a growing number of free databases like Asknature.org, which enable designers to find useful analogies between their design goals and Biological strategies. As these databases mature, product design efforts will be able to augment their creative output with improved results.
Applying a Multi-Dimensional Digital Food and Nutrition Literacy Model to Inform Research and Policies to Enable Adults in the U.S. Supplemental Nutrition Assistance Program to Make Healthy Purchases in the Online Food Retail Ecosystem
Consavage Stanley, Katherine; Harrigan, Paige B.; Serrano, Elena L.; Kraak, Vivica (MDPI, 2021-08-06)
The United States (U.S.) Department of Agriculture (USDA)-administered Supplemental Nutrition Assistance Program (SNAP) made substantial changes in response to the coronavirus disease 2019 (COVID-19) pandemic. These changes highlight the need to identify the digital literacy skills and capacities of SNAP adults to purchase healthy groceries online. We conducted a scoping review of four electronic databases, Google and Google Scholar to identify studies that measured food and nutrition literacy outcomes for U.S. adults. We applied a multi-dimensional digital food and nutrition literacy (MDFNL) model to assess six literacy levels and components. Of 18 studies published from 2006–2021, all measured functional and interactive literacy but no study measured communicative, critical, translational, or digital literacy. Six studies examined SNAP or SNAP-Education outcomes. Adults with higher food or nutrition literacy scores had better cognitive, behavioral, food security and health outcomes. We suggest how these findings may inform research, policies, and actions to strengthen the multi-dimensional literacy skills of SNAP participants and SNAP-eligible adults to support healthy purchases in the online food retail ecosystem.

Browse

Browsing Strategic Growth Areas (SGAs) by Content Type "Article - Refereed"

Results Per Page

Sort Options