Show simple item record

dc.contributor.authorConn, Arielen_US
dc.date.accessioned2013-04-12T08:00:21Z
dc.date.available2013-04-12T08:00:21Z
dc.date.issued2013-03-22en_US
dc.identifier.othervt_gsexam:385en_US
dc.identifier.urihttp://hdl.handle.net/10919/19317
dc.description.abstractA series of small- to moderate-sized earthquakes occurred in Arkansas, Oklahoma and Texas from 2010 to 2012, coinciding with the arrival of the EarthScope Transportable Array (TA). The data the TA recorded from those earthquakes provide a unique opportunity to study attenuation of the Lg phase in the mid-continent and Gulf Coastal region.
The TA data reveal previously unrecognized regional variability of ground motion propagation in the central United States. A study of the Fourier amplitude spectra shows the Lg phase exhibiting strong attenuation for ray paths from Arkansas, southwest through the Ouachita Orogenic Belt and into central Texas, and south into the Gulf Coastal region. Less attenuation is seen in central Texas for ray paths extending directly south from Oklahoma, though attenuation remains strong along the Gulf Coast. In contrast, ray paths to the north, regardless of source location, exhibit very little attenuation, especially in northern Missouri and southern Iowa.
Regression models that incorporate near-receiver (distance-independent) attenuation due to thick sediments in the Gulf Coastal Plain successfully reduce path-related bias in the regression residuals for stations near the Gulf Coast. Dividing the central United States into three regions (the Gulf Coastal Plain, the Great Plains and the Midwest) further reduced bias, and allowed for the development of Q models in the Gulf Coastal Plain and the Great Plains. In the Gulf Coastal Plain, the Q model for that part of the ray path through the basement, from the earthquake to the base of the sediment deposits below the receiver, was found to be Q=(295±11)*f^(0.645±0.029). The model for attenuation in the sediment section near the receiver in the Gulf Coastal Plain is Q=(72±6.7)*f^(0.32±0.06) (velocity through the sediments is unconfirmed but thought to be approximately 1 km/s). The Q model for the Great Plains is  Q=(692±61.3)*f^(0.43±0.07). The Midwest region exhibited extremely complicated behavior: the data indicate little or no attenuation of amplitudes in the frequency band from approximately 0.7 to 2.0 Hz. As a consequence, Q in the Midwest region in that frequency range could not be realistically determined.
en_US
dc.format.mediumETDen_US
dc.publisherVirginia Techen_US
dc.rightsThis Item is protected by copyright and/or related rights. Some uses of this Item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s).en_US
dc.subjectLg wave attenuationen_US
dc.subjectQ valueen_US
dc.subjectearthquake wave propagationen_US
dc.subjectCentral United Statesen_US
dc.subjectgeometrical spreadingen_US
dc.titleQ Models for Lg Wave Attenuation in the Central United Statesen_US
dc.typeThesisen_US
dc.contributor.departmentGeosciencesen_US
dc.description.degreeMaster of Scienceen_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineGeosciencesen_US
dc.contributor.committeechairChapman, Martin C.en_US
dc.contributor.committeememberMartin, James R.en_US
dc.contributor.committeememberHole, John Andrewen_US


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record