VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 22, through Friday, November 24, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!
The Integration of State Space into the Dynamic Synthesis/Design and Operational/Control Optimization of a PEMFC System
MetadataShow full item record
ABSTRACT A typical approach to the synthesis/design optimization of energy systems is to only use steady state operation and high efficiency (or low total life cycle cost) at full load as the basis for the synthesis/design. Transient operation is a secondary task to be solved by system and control engineers once the synthesis/design is fixed. This thesis considers the system dynamics in the process of developing the system using a set of transient thermodynamic, kinetic, and geometric as well as physical and cost models developed and implemented for the components of a 5 kW PEMFC (Proton Exchange Membrane Fuel Cell) system. The system is composed of three subsystems: a stack subsystem (SS), a fuel processing subsystem (FPS), and a work recovery and air supply subsystem (WRAS). To study the effect of control to the optimization, State Space control design is used in a looped set of optimizations. These results are compared to those resulting from a more direct optimization of the controller designs in which the gains for the controllers are part of the decision variable set for the overall optimization. Then, dynamic optimization results are obtained and compared with steady-state optimization results to illustrate the advantages of dynamic optimization. Also, a multi-level optimization technique, dynamic iterative local-global optimization (DILGO), is utilized for the optimization of the PEMFC system by separating the system into three subsystems and the results are compared with the single level optimization results, in which the whole system is optimized together.
- Doctoral Dissertations