VTechWorks staff will be away for the Thanksgiving holiday starting Wednesday afternoon, Nov. 25, through Sunday Nov. 29, and will not be replying to requests during this time. Thank you for your patience.

Show simple item record

dc.contributor.authorKulp, Galen W.en_US
dc.date.accessioned2014-03-14T20:30:15Z
dc.date.available2014-03-14T20:30:15Z
dc.date.issued2001-12-14en_US
dc.identifier.otheretd-01072002-142434en_US
dc.identifier.urihttp://hdl.handle.net/10919/30840
dc.description.abstractProton exchange membrane (PEM) fuel cells are considered one of the best potential alternative power sources for automobiles. For this application, high efficiency and high power density are required. Pressurizing the fuel cell system can give higher efficiency, higher power density and better water balance characteristics for the fuel cell, but pressurization uses a percentage of the fuel cell output power. The compressor used to elevate the pressure has a direct effect on the system efficiency and water balance characteristics. A variety of compressors are being developed for fuel cell applications. Two compressor and expander technologies are discussed in this paper: the Opcon 1050 positive displacement twin-screw compressor and expander, and a Honeywell turbocompressor and expander. The effect of these compressors and expanders on the system at maximum load, low load, and set minimum airflow are examined. The effects of ambient conditions, stack temperature, and increased twin-screw compressor pressure are also examined. The turbocompressor proves to be a superior machine in terms of efficiency, and therefore offers the most promising effect on system efficiency of the two compressors. The twin-screw compressor, on the other hand, offers more flexible pressure ratio and better water balance characteristics at low fuel cell loads, which is an important factor with PEM fuel cell systems. Increased ambient and stack temperature has a significant negative effect on the water balance and a small positive effect on efficiency. Increasing the pressure for the twin-screw compressor significantly improves the water balance characteristics with some loss in efficiency. These results show the importance of determining the system operating range and operating conditions in the choice of a compressor for a fuel cell systemen_US
dc.publisherVirginia Techen_US
dc.relation.haspartGalen_Kulp.pdfen_US
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectAutomotiveen_US
dc.subjectCompressor Technologyen_US
dc.subjectAlternative Energy Sourcesen_US
dc.subjectFuel Cellsen_US
dc.titleA Comparison of Two Air Compressors for PEM Fuel Cell Systemsen_US
dc.typeThesisen_US
dc.contributor.departmentMechanical Engineeringen_US
dc.description.degreeMaster of Scienceen_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineMechanical Engineeringen_US
dc.contributor.committeechairNelson, Douglas J.en_US
dc.contributor.committeememberO'Brien, Walter F. Jr.en_US
dc.contributor.committeememberEllis, Michael W.en_US
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-01072002-142434/en_US
dc.date.sdate2002-01-07en_US
dc.date.rdate2003-01-15
dc.date.adate2002-01-15en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record