Modern devices provide a multitude of services that use radio frequencies in continual smaller packages. This size leads to an antenna used to transmit and receive information being usually very inefficient and a lot of power is wasted just to be able to transmit a signal. To mitigate this problem a new antenna was introduced by Dr. Manteghi that is capable of working efficiently across a large band. The antenna achieves this large band by doing quick frequency hopping across multiple channels. In order to test the performance of this antenna against more common antennas, a software radio was needed, such that tested antennas can be analyzed using multiple modulations.

This paper presents a software defined radio system that was designed for the purpose of testing the bit-error rate of digital modulations schemes using described and other antennas. The designed system consists of a DSP, an FPGA, and commercially available modules. The combination allows the system to be flexible with high performance, while being affordable. Commercial modules are available for multiple frequency bands and capable of fast frequency switching required to test the antenna. The DSP board contains additional peripherals that allows for more complex projects in the future. The block structure of the system is also very educational as each stage of transmission and reception can be tested and observed.

The full system has been constructed and tested using simulated and real signals. A code was developed for communication between commercial modules and the DSP, bit error rate testing, data transmission, signal generation, and signal reception. A graphical user interface (GUI) was developed to help user with information display and system control. This thesis describes the software-defined-radio design in detail and shows test results at the end.