Behavior of Magneto-Rheological Fluids Subject to Impact and Shock Loading
Norris, James Alexander
MetadataShow full item record
Investigations on the design of controllable magnetorheological (MR) fluid devices have focused heavily on low velocity and low frequency applications. The extensive work in this area has led to a good understanding of MR fluid properties at low velocities and frequencies. However, the issues concerning MR fluid behavior in impact and shock applications are relatively unknown. To investigate MR fluid properties in this regime, MR dampers were subjected to impulsive loads. A drop-tower test facility was developed to simulate the impact events. The design includes a guided drop-mass released from variable heights to achieve different impact energies. Five drop-heights and two fundamental MR damper configurations were tested. The two configurations were a double-ended piston and a mono-tube with nitrogen accumulator. To separate the dynamics of the MR fluid from the dynamics of the current source, each damper received a constant supply current before the impact event. A total of five supply currents were investigated for each impact velocity. After reviewing the results, it was concluded that the effect of energizing the MR fluid only leads to â controllabilityâ below a certain fluid velocity for the double-ended design. In other words, until the fluid velocity dropped below some threshold, the MR fluid behaved as if it was not energized, regardless of the strength of the magnetic field. Controllability was defined when greater supply currents yielded larger damping forces. For the mono-tube design, it was shown that the MR fluid was unable to travel through the gap fast enough during the initial impact. Consequently, the damper piston and accumulator piston traveled in unison until the accumulator bottomed out. After which, the fluid was forced through the gap. In conclusion, the two designs were compared and general recommendations on designing MR dampers for impulsive loading were made. Possible directions for future research were presented as well.
- Masters Theses