Show simple item record

dc.contributor.authorBell, Robert M.en_US
dc.date.accessioned2014-03-14T20:41:46Z
dc.date.available2014-03-14T20:41:46Z
dc.date.issued1985-02-04en_US
dc.identifier.otheretd-07212009-040221en_US
dc.identifier.urihttp://hdl.handle.net/10919/34100
dc.description.abstractThe use of wood stoves for residential heating has been increasing over the past several years. This increased use of wood stoves has caused significant concern about increased air pollution. Development of improved emissions and efficiency measurement methods will allow the development of improved stoves. Room calorimetry is used as the standard for measuring the energy efficiency of stoves. Unfortunately, this method is expensive and few wood stove manufacturers can afford it. For this reason, flue loss methods which are generally less expensive are attractive. Flue loss methods measure either directly or indirectly the following instantaneous losses: 1. Sensible energy loss due to the flue gases being at a higher temperature than the ambient. 2. Chemical energy loss from incomplete combustion. 3. Latent energy loss due to water existing as a vapor in the flue gas. This loss is included since the higher heating value of wood is used. The instantaneous efficiency of the stove can then be determined from measurement of these three losses and the instantaneous energy input. This project is part of a larger project which has an overall objective to develop an accurate flue loss method. An accurate flue loss method is needed since many of the traditional flue loss methods have unknown accuracies.en_US
dc.format.mediumBTDen_US
dc.publisherVirginia Techen_US
dc.relation.haspartLD5655.V855_1985.B444.pdfen_US
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectFlue gasesen_US
dc.subject.lccLD5655.V855 1985.B444en_US
dc.titleMass flow and temperature measurements in the flue of a woodburning applianceen_US
dc.typeThesisen_US
dc.contributor.departmentMechanical Engineeringen_US
dc.description.degreeMaster of Scienceen_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineMechanical Engineeringen_US
dc.contributor.committeechairJaasma, Dennis R.en_US
dc.contributor.committeememberWood, Henry L.en_US
dc.contributor.committeememberDiller, Thomas E.en_US
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-07212009-040221/en_US
dc.date.sdate2009-07-21en_US
dc.date.rdate2009-07-21
dc.date.adate2009-07-21en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record