Virginia Tech
    • Log in
    View Item 
    •   VTechWorks Home
    • ETDs: Virginia Tech Electronic Theses and Dissertations
    • Doctoral Dissertations
    • View Item
    •   VTechWorks Home
    • ETDs: Virginia Tech Electronic Theses and Dissertations
    • Doctoral Dissertations
    • View Item
    JavaScript is disabled for your browser. Some features of this site may not work without it.

    Progressive damage and failure of unidirectional fiber reinforced laminates under impact loading with composite properties derived from a micro-mechanics approach

    Thumbnail
    View/Open
    GOPINATH_GAUTAM_D_2011.pdf (5.563Mb)
    Downloads: 8723
    Date
    2011-01-31
    Author
    Gopinath, Gautam
    Metadata
    Show full item record
    Abstract
    Micromechanics theories have been used to develop macro-level constitutive relations for infinitesimal elastoplastic deformations of unidirectional fiber reinforced laminates. The matrix is assumed to be isotropic and deform elasto-plastically and the fibers transversely isotropic and linear elastically. We have analyzed damage initiation, damage progression, and failure of 16-ply unidirectional fiber reinforced laminates impacted at normal incidence by a rigid sphere. The damage is assumed to initiate when at least one of Hashin's failure criteria is satisfied with the evolving damage modeled by an exponential relation. Transient three dimensional impact problems have solved using the finite element method (FEM) by implementing the material damage model as a user defined subroutine in the FE software ABAQUS. From strains supplied by ABAQUS the subroutine uses the free shear traction technique and values of material parameters of the constituents to find average stresses in a FE, and checks for Hashin's failure criteria. If the damage has initiated, the subroutine evaluates the damage developed, computes resulting stresses, and provides them to ABAQUS. The irreversibility of the damage is satisfied by requiring that the damage evolved does not decrease during unloading. The delamination failure mode is simulated by using the cohesive zone model and the degradation of material properties already available in ABAQUS. The computed time histories of the axial load acting on the impactor are found to agree well with the experimental ones available in the literature. The effect of stacking sequence in the laminate upon the impact load has been ascertained.
    URI
    http://hdl.handle.net/10919/37534
    Collections
    • Doctoral Dissertations [16358]

    If you believe that any material in VTechWorks should be removed, please see our policy and procedure for Requesting that Material be Amended or Removed. All takedown requests will be promptly acknowledged and investigated.

    Virginia Tech | University Libraries | Contact Us
     

     

    VTechWorks

    AboutPoliciesHelp

    Browse

    All of VTechWorksCommunities & CollectionsBy Issue DateAuthorsTitlesSubjectsThis CollectionBy Issue DateAuthorsTitlesSubjects

    My Account

    Log inRegister

    Statistics

    View Usage Statistics

    If you believe that any material in VTechWorks should be removed, please see our policy and procedure for Requesting that Material be Amended or Removed. All takedown requests will be promptly acknowledged and investigated.

    Virginia Tech | University Libraries | Contact Us