A method for the spatial functionalization of the dynamic response of a structure with structural stability considerations

TR Number
Date
1993
Journal Title
Journal ISSN
Volume Title
Publisher
Virginia Tech
Abstract

The scanning Laser Doppler Vibrometer (LDV) has developed into a useful tool for rapidly acquiring spatially dense structural dynamic response information in a noncontacting manner. The research presented in this paper is part of a larger project at the Structural Imaging and Modal Analysis Laboratory in the Department of Mechanical Engineering at Virginia Polytechnic Institute and State University, Blacksburg, VA, to develop a six-degree-of-freedom (6-DOF) structural response model based on experimental data. This paper represents a portion of the research for the 6-DOF structural imaging project.

A method for creating a functionalized description of a discreetly sampled 2-D data field containing response measurements evenly spaced in laser scan angie coordinates is presented. A filtering process involving a median and edge-median filter algorithm followed by a Discrete Fourier Transform/low-pass spatial frequency domain filter/Inverse Discrete Fourier Transform algorithm is used to reduce the effect of errant data recorded by the LDV data acquisition system. A means of evaluating the performance of this process is developed.

Finally, an experiment to determine the relationship between structural response stability and ambient temperature and relative humidity is presented. The response of a lightly damped structure was studied over a twenty-six hour period. A direct relationship between temperature and the dynamic response of the structure was found. This study is important to the overall 6-DOF project since structural stability is assumed in merging the various scans of the structure to obtain 6-DOF information. Recommendations are given for further research of topics discussed in this thesis.

Description
Keywords
Citation
Collections