Show simple item record

dc.contributor.authorAwa, Teck Wahen_US
dc.date.accessioned2014-03-14T21:40:31Z
dc.date.available2014-03-14T21:40:31Z
dc.date.issued1988-05-05en_US
dc.identifier.otheretd-07152010-020219en_US
dc.identifier.urihttp://hdl.handle.net/10919/43742
dc.description.abstract

The objective of this study was to develop an inexpensive automated device for grading raw oyster meats. The automation technique chosen was digital imaging. Typically, a computer vision system contains a microcomputer and a digital camera. An inexpensive digital camera connected to a personal computer was used to measure the projected area of the oyster meats. Physical characteristics of the oyster meats were important in designing a computer vision grading system and the necessary data were not found in the literature. Selected physical characteristics of oyster meats, including the projected area, weight, height, and volume were measured by independent methods. The digital image areas were found to be highly correlated to oyster meat volumes and weights. Currently oysters are marketed on the basis of volume. The results from this study indicated that the relationship between the oyster meat area as measured by computer vision and volume can be used as a grading criterion. The oysters ranged in volume from 3.5 cm3 to 19.4 cm3 A three dimensional image was not required because the height was not important. Tests showed that the system was consistent and successfully graded 5 oysters per second. The system was calibrated, and the prediction equation was validated with an estimated measurement error of ± 3.04 cm3 at a 95% confidence level. The development of automated graders using digital imaging techniques could help improve the quality and consistency of the graded oyster meats.

en_US
dc.format.mediumBTDen_US
dc.publisherVirginia Techen_US
dc.relation.haspartLD5655.V855_1988.A842.pdfen_US
dc.subjectOystersen_US
dc.subject.lccLD5655.V855 1988.A842en_US
dc.titleDevelopment of an inexpensive computer vision system for grading oyster meatsen_US
dc.typeThesisen_US
dc.contributor.departmentAgricultural Engineeringen_US
dc.description.degreeMaster of Scienceen_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineAgricultural Engineeringen_US
dc.contributor.committeechairByler, Richard K.en_US
dc.contributor.committeememberDiehl, Kenneth C.en_US
dc.contributor.committeememberShanholtz, Vernon O.en_US
dc.identifier.sourceurlhttp://scholar.lib.vt.edu/theses/available/etd-07152010-020219/en_US
dc.date.sdate2010-07-15en_US
dc.date.rdate2010-07-15
dc.date.adate2010-07-15en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record