Show simple item record

dc.contributor.authorArthur, Charles E.en_US
dc.date.accessioned2016-02-01T18:05:41Z
dc.date.available2016-02-01T18:05:41Z
dc.date.issued1974en_US
dc.identifier.urihttp://hdl.handle.net/10919/64699
dc.description.abstractThe significance of the role of advanced composite materials in many engineering applications is increasing.Environmental effects on the material properties of composites is an important aspect of design considerations . To determine the long term influence of the individual contributions of time, temperature, and humidity on composite materials would require extensive numbers of specimens an:f tests. In order to isolate significant variables experiments have been designed for maximum utilization of specimens. Due to wide variation in the information obtained from experimentation, a statistical analysis of the data was conducted. Multiple regression techniques were employed and the significance of the individual variables was tested. This experimental program resulted in the development of response surfaces for the complex moduli of composite materials.en
dc.format.extent65 leavesen_US
dc.format.mimetypeapplication/pdfen_US
dc.language.isoen_USen_US
dc.publisherVirginia Polytechnic Institute and State Universityen_US
dc.rightsThis Item is protected by copyright and/or related rights. Some uses of this Item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s).en_US
dc.subject.lccLD5655.V855 1974.A78en_US
dc.subject.lcshComposite materialsen_US
dc.titleA response surface for the complex modulus of composite materialsen_US
dc.typeThesisen_US
dc.contributor.departmentEngineering Mechanicsen_US
dc.description.degreeMaster of Scienceen_US
dc.identifier.oclc21268526en_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineEngineering Mechanicsen_US
dc.contributor.committeechairHeller, Robert A.en
dc.contributor.committeememberSwift, George W.en
dc.contributor.committeememberStinchcomb, Wayne W.en
dc.type.dcmitypeTexten_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record