Show simple item record

dc.contributor.authorPrasanna Kumar, Siddharthen_US
dc.date.accessioned2017-08-22T08:00:53Z
dc.date.available2017-08-22T08:00:53Z
dc.date.issued2017-08-21en_US
dc.identifier.othervt_gsexam:12576en_US
dc.identifier.urihttp://hdl.handle.net/10919/78724
dc.description.abstractUnderstanding failure mechanics of mechanical equipment is one of the most important aspects of structural and aerospace engineering. Crack growth being one of the major forms of failure in structural components has been studied for several decades to achieve greater reliability and guarantee higher safety standards. Conventional approaches using the finite element framework provides accurate solutions, yet they require extremely complicated numerical approaches or highly fine mesh densities which is computationally expensive and yet suffers from several numerical instabilities such as element entanglement or overly soften element behavior. The eXtended Finite Element Method (XFEM) is a relatively recent concept developed for modeling geometric discontinuities and singularities by introducing the addition of new terms to the classical shape functions in order to allow the finite element formulation to remain the same. XFEM does not require the necessity of computationally expensive numerical schemes such as active remeshing and allows for easier crack representation. In this work, verifies the validity of this new concept for quasi-static crack growth in tension with Abaqus' XFEM is employed. In the course of the work, the effect of various parameters that are involved in the modelling of the crack are parametrically analyzed. The load-displacement data and crack growth were used as the comparison criterion. It was found that XFEM is unable to accurately represent crack growth in the models in the elastic region without direct manipulation of the material properties. The crack growth in the plastic region is found to be affected by certain parameters allowing us to tailor the model to a small degree. This thesis attempts to provide a greater understanding into the parametric dependencies of XFEM crack growth.en_US
dc.format.mediumETDen_US
dc.publisherVirginia Techen_US
dc.rightsThis item is protected by copyright and/or related rights. Some uses of this item may be deemed fair and permitted by law even without permission from the rights holder(s), or the rights holder(s) may have licensed the work for use under certain conditions. For other uses you need to obtain permission from the rights holder(s).en_US
dc.subjectXFEMen_US
dc.subjectCrack propagationen_US
dc.subjectAbaqusen_US
dc.subjectparametric studyen_US
dc.titleParametric Sensitivities of XFEM Based Prognosis for Quasi-static Tensile Crack Growthen_US
dc.typeThesisen_US
dc.contributor.departmentMechanical Engineeringen_US
dc.description.degreeMaster of Scienceen_US
thesis.degree.nameMaster of Scienceen_US
thesis.degree.levelmastersen_US
thesis.degree.grantorVirginia Polytechnic Institute and State Universityen_US
thesis.degree.disciplineMechanical Engineeringen_US
dc.contributor.committeechairBayandor, Javiden_US
dc.contributor.committeememberMirzaeifar, Rezaen_US
dc.contributor.committeememberWest, Robert L.en_US


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record