Show simple item record

dc.contributor.authorAnand, Saurabhen
dc.contributor.authorVerma, Neeraven
dc.contributor.editorPoquette, Benen
dc.date.accessioned2019-06-19T21:11:06Zen
dc.date.available2019-06-19T21:11:06Zen
dc.date.issued2006-09-22en
dc.identifier.citationAnand, S. and Verma, N., 2006. Effect of Sintering Temperature, Heat Treatment and Tempering on Hardness of Sintered Hardened Grade Steels (SH737-2Cu-0.9C). Journal of Undergraduate Materials Research, 2. DOI: http://doi.org/10.21061/jumr.v2i0.0603en
dc.identifier.issn1934-7677en
dc.identifier.urihttp://hdl.handle.net/10919/90310en
dc.description.abstractThe present study examines the change in hardness of sintered hardened steel (SH737-2Cu-0.9C) sintered at different temperatures, heat treated by various methods and then tempered at different temperatures.The samples were transient liquid phase sintered at 1120 °C, 1180 °C and 1250 °C respectively.The sintered samples were characterized then for density and densification parameter.The samples were austenitized at 900 °C and cooled by four different methods viz.furnace cooling (annealing), air cooling (normalizing), oil quenching, and brine quenching.The samples were then tested for their hardness using Vickers’s hardness at 10 kgf load.The trend of hardness observed was found minimum for air cooled and maximum for brine quenched.In case of sample sintered at 1250 °C, relatively higher hardness was observed.The oil and brine quenched samples were then tempered at 200 °C, 400 °C, 600 °C and 700 °C.The hardness pattern observed typically showed secondary hardness taking place (due to presence of Mn and Mo) and reaching the maximum around 600 °C.en
dc.format.extent6 pagesen
dc.format.extent498.48 KBen
dc.format.mimetypeapplication/pdfen
dc.format.mimetypeapplication/zipen
dc.language.isoenen
dc.publisherVirginia Tech Department of Materials Science and Engineeringen
dc.rightsIn Copyrighten
dc.rights.urihttp://rightsstatements.org/vocab/InC/1.0/en
dc.subjectMaterials Science and Engineeringen
dc.subjectHeat Treatmenten
dc.titleEffect of Sintering Temperature, Heat Treatment, and Tempering on Hardness of Sintered Hardened Grade Steelsen
dc.typeArticleen
dc.rights.holderVirginia Tech Department of Materials Science and Engineeringen
dc.title.serialJournal of Undergraduate Materials Researchen
dc.identifier.doihttps://doi.org/10.21061/jumr.v2i0.0603en
dc.identifier.volume2en
dc.identifier.issue1en
dc.type.dcmitypeTexten
dc.identifier.eissn2578-9570en


Files in this item

Thumbnail
Thumbnail

This item appears in the following Collection(s)

Show simple item record