Load Learning and Topology Optimization for Power Networks
MetadataShow full item record
With the advent of distributed energy resources (DERs), electric vehicles, and demand-response programs, grid operators are in dire need of new monitoring and design tools that help improve efficiency, reliability, and stability of modern power networks. To this end, the work in this thesis explores a generalized modeling and analysis framework for two pertinent tasks: i) learning loads via grid probing, and; ii) optimizing power grid topologies for stability. Distribution grids currently lack comprehensive real-time metering. Nevertheless, grid operators require precise knowledge of loads and renewable generation to accomplish any feeder optimization task. At the same time, new grid technologies, such as solar panels and energy storage units are interfaced via inverters with advanced sensing and actuation capabilities. In this context, we first put forth the idea of engaging power electronics to probe an electric grid and record its voltage response at actuated and metered buses to infer non-metered loads. Probing can be accomplished by commanding inverters to momentarily perturb their power injections. Multiple probing actions can be induced within a few tens of seconds. Load inference via grid probing is formulated as an implicit nonlinear system identification task, which is shown to be topologically observable under certain conditions. The analysis holds for single- and multi-phase grids, radial or meshed, and applies to phasor or magnitude-only voltage data. Using probing to learn non-constant-power loads is also analyzed as a special case. Once a probing setup is deemed topologically observable, a methodology for designing probing injections abiding by inverter and network constraints to improve load estimates is provided. The probing task under noisy phasor and non-phasor data is tackled using a semidefinite-program relaxation. As a second contribution, we also study the effect of topology on the linear time-invariant dynamics of power networks. For a variety of stability metrics, a unified framework based on the H2-norm of the system is presented. The proposed framework assesses the robustness of power grids to small disturbances and is used to study the optimal placement of new lines on existing networks as well as the design of radial topologies for new networks.
- Doctoral Dissertations