Mettanurak, Thammarat2014-03-142014-03-142008-04-04etd-08272008-150214http://hdl.handle.net/10919/34804Several researchers have concluded that there is little or no relationship between specific gravity and ring width or growth rate in yellow-poplar (Liriodendron tulipifera L.). Because most mechanical properties of wood are also closely related to specific gravity, it would thus be of interest to learn how minimum suppression and maximum release years' evidence that can be extracted from radial growth patterns based on a modified radial growth averaging (RGA) technique's influence the compression parallel to grain strength and specific gravity of wood. This study is designed to evaluate the effects of growth suppression and release on ultimate crushing stress and specific gravity for small-sized yellow-poplar specimens. Additionally, the relationship between specific gravity and ultimate crushing stress is investigated. Twenty-three yellow-poplar cores were examined for their growth ring widths. Minimum suppression and maximum release years were identified based on the modified RGA criteria method. From each increment core, three 1 Ã 1 Ã 4 mm specimens from both minimum suppression and maximum release years were tested for their ultimate crushing stresses using a micro-mechanical test system. The specific gravity of each specimen was also recorded. These data were analyzed using a paired samples t test and a simple linear regression. The results indicate that the mean ultimate crushing stress and specific gravity of maximum release years were significantly higher than that of minimum suppression years. Furthermore, the ultimate crushing stress was linearly related to the specific gravity of the specimens.In Copyrightring widthtree ringssuppression yearsultimate crushing strengthcompression parallel to grainLiriodendron tulipifera L.increment coreyellow-poplarrelease yearswood specific gravityradial growth averaging techniqueThesishttp://scholar.lib.vt.edu/theses/available/etd-08272008-150214/