Kessler, Ellis Carl2021-06-252021-06-252021-06-24vt_gsexam:31637http://hdl.handle.net/10919/104020With the rise of the Internet of Things (IoT) and smart buildings, new algorithms are being developed to understand how occupants are interacting with buildings via structural vibration measurements. These vibration-based occupant inference algorithms (VBOI) have been developed to localize footsteps within a building, to classify occupants, and to monitor occupant health. This dissertation will present a three-stage journey proposing a path forward for VBOI research based on physically informed data-driven models of structural dynamical systems. The first part of this dissertation presents a method for extracting temporal gait parameters via underfloor accelerometers. The time between an occupant's consecutive steps can be measured with only structural vibration measurements with a similar accuracy to current gait analysis tools such as force plates and in-shoe pressure sensors. The benefit of this, and other VBOI gait analysis algorithms, is in their ease of use. Gait analysis is currently limited to a clinical setting with specialized measurement systems, however VBOI gait analysis provides the ability to bring gait analysis to any building. VBOI algorithms often make some simplifying assumptions about the dynamics of the building in which they operate. Through a calibration procedure, many VBOI algorithms can learn some system parameters. However, as demonstrated in the second part of this dissertation, some commonly made assumptions oversimplify phenomena present in civil structures such as: attenuation, reflections, and dispersion. A series of experimental and theoretical investigations show that three common assumptions made in VBOI algorithms are unable to account for at least one of these phenomena, leading to algorithms which are more accurate under certain conditions. The final part of this dissertation introduces a physically informed data-driven modelling technique which could be used in VBOI to create a more complete model of a building. Continuous residue interpolation (CRI) takes FRF measurements at a discrete number of testing locations, and creates a predictive model with continuous spatial resolution. The fitted CRI model can be used to simulate the response at any location to an input at any other location. An example of using CRI for VBOI localization is shown.ETDIn CopyrightSmart BuildingsVibrationWave PropagationGait AnalysisData-Driven ModellingDissertation