Verma, Anshuman2019-08-042019-08-042018-02-09vt_gsexam:12265http://hdl.handle.net/10919/92699Field programmable gate arrays (FPGAs) have been emerging as a promising bedrock to provide opportunities for several types of accelerators that spans across various domains such as finance, web-search, and data center networking, among others. Research interests facilitating the development of accelerators on FPGAs are increasing significantly, in particular, because of their effectiveness with a variety of applications, flexibility, and high performance per watt. However, several key challenges remain that hinder their large-scale deployment. Overcoming these challenges would enable them to match the pervasiveness of graphics processor units (GPUs), their principal competitors in this arena. One of the primary reasons responsible for the slow adaptation by programmers has been the programming model, which uses a low-level hardware description language (HDL). Using HDLs require a detailed understanding of logic design and significant effort to implement and verify the behavioral models, with the latter growing with its complexity. Recent advancements in high-level language synthesis (HLS) tools have addressed this challenge to a considerable extent by allowing the programmers to write their applications in a high-level language named OpenCL. These applications are then compiled and synthesized to create a bitstream that configures the FPGA. This thesis characterizes the efficacy of HLS compiler optimizations that can be employed to improve the performance of these applications. The synthesized hardware from OpenCL kernels is fundamentally different from traditional hardware such as CPUs and GPUs, which exploit instruction level parallelism (ILP) thread level parallelism (TLP), or data level parallelism (DLP) for performance gains. FPGAs typically use deep pipelining (i.e., ILP) for performance. A stall in this pipeline may severely undermine the performance of applications. Thus, it is imperative to identify and remove any such bottlenecks. To this end, this thesis presents and discusses a software-centric framework to debug and profile the synthesized designs generated using HLS tools. This thesis proposes basic code patterns, including a timestamp and a scalable framework, which can be plugged easily into OpenCL kernels, to collect and process run-time information dynamically. This scalable framework has a small overhead for area utilization and frequency but provides fine-grained information about the bottlenecks and latencies in design. Additionally, although HLS tools have improved programmability, this may come at the cost of performance or area utilization. This thesis addresses this design trade-off via a comparative study of a hand-coded design in HDL and an architecturally similar, tool-generated design using an OpenCL compiler in the application area of 3D-stencil (i.e., structured grid) computation. Experiments in this thesis show that the performance of an OpenCL approach can achieve 95% of the peak attainable performance of a microkernel for multiple problem sizes. In comparison to the OpenCL approach, an HDL approach results in approximately 50% less memory usage and only 2% better performance on average.ETDIn CopyrightField programmable gate arraysOpenCLHDLHLSAOCLVerilogAcceleratorGEMStencilThesis