Virginia Tech. Department of Mechanical Engineering. Vibration and Acoustics LaboratoriesJohnson, Brody D.Fuller, Chris R.2015-05-272015-05-272000-02-01Johnson, B. D. & Fuller, C. R. (2000). Broadband control of plate radiation using a piezoelectric, double-amplifier active-skin and structural acoustic sensing. Journal of the Acoustical Society of America, 107(2), 876-884. doi: 10.1121/1.4283610001-4966http://hdl.handle.net/10919/52670The potential of a piezoelectric, double-amplifier active-skin with structural acoustic sensing (SAS) is demonstrated for the reduction of broadband acoustic radiation from a clamped, aluminum plate. The active-skin is a continuous covering of the vibrating portions of the plate with active, independently controllable piezoelectric, double-amplifier elements and is designed to affect control by altering the continuous structural radiation impedance rather than structural vibration. In simulation, acoustic models are sought for the primary and secondary sources that incorporate finite element methods. Simulation indicates that a total radiated power attenuation in excess of 10 dB may be achieved between 250 and 750 Hz with microphone error sensing, while under SAS the radiated power is reduced by nearly 8 dB in the same frequency range. In experiment, the adaptive feed forward filtered-x LMS (least mean square) algorithm, implemented on a Texas Instruments C40 DSP, was used in conjunction with the 6I6O control system. With microphone error sensing, 11.8-dB attenuation was achieved in the overall radiated power between 175 and 600 Hz. while inclusion of SAS resulted in a 7.3-dB overall power reduction in this frequency band.9 pagesapplication/pdfen-USIn CopyrightRadiation monitoringMicrophonesPiezoelectricityStructural acousticsAcoustic modelingArticle - Refereedhttp://scitation.aip.org/content/asa/journal/jasa/107/2/10.1121/1.428361https://doi.org/10.1121/1.428361