Johnsson, Erik L.2014-03-142014-03-141991-02-05etd-05022009-040621http://hdl.handle.net/10919/42410A fast response method for detection of ignition and extinction of liquid spray flames has been improved. Also, a method of determining fuel-to-air ratios and temperatures of pre-mixed, gaseous flames has been developed. Both methods utilize chemiluminescent signals from an OH system centered at 309 nm and a CH system centered at 431 nm. The ignition and extinction method was improved by replacing an optical system composed of lenses and a monochromator by a system composed of a fiber optic cable and band pass interference filters. The use of a solid-state photodiode instead of a photomultiplier tube was investigated. Transient histories of the OH and CH signals were recorded by performing light-off ignition and intermittent ignition flame tests. These signal histories were compared to histories obtained using the original apparatus. The fuel-to-air ratio and temperature detection method was investigated by recording the spectra of laminar, pre-mixed methane flames of known stoichiometry with a lens, monochromator, and photomultiplier tube set-up and measuring the flame temperatures with a high-temperature Pt-10%Rh thermocouple. Various combinations of signal characteristics were found to be functions of fuel-to-air ratio and temperature. Optimum signals for monitoring with a detector were determined. Recommendations for future work in this area are discussed.x, 124 leavesBTDapplication/pdfenIn CopyrightLD5655.V855 1991.J656ChemiluminescenceFlameThesishttp://scholar.lib.vt.edu/theses/available/etd-05022009-040621/