Wilts, Emily Marie2022-03-262022-03-262020-10-01vt_gsexam:27539http://hdl.handle.net/10919/109442Additive manufacturing (AM) creates 3D objects out of polymers, ceramics, and metals to enable cost-efficient and rapid production of products from aerospace to biomedical applications. Personalized products manufactured using AM, such as personalized dosage pharmaceuticals, tissue scaffolds, and medical devices, require specific material properties such as biocompatibility and biodegradability, etc. Polymers possess many of these qualities and tuning molecular structure enables a functional material to successfully deliver the intended application. For example, water-soluble polymers such as poly(vinyl pyrrolidone) and poly(ethylene glycol) both function as drug delivery materials because of their inherit water-solubility and biocompatibility. Other polymers such as polylactide and polyglycolide possess hydrolytically cleavable functionalities, which enables degradation in the body. Non-covalent bonds, such as hydrogen bonding and electrostatic interactions, enable strong connections capable of holding materials together, but disconnect with heat or solvation. Taking into consideration some of these polymer functionalities, this dissertation investigates how to utilize them to create functional biomedical products using AM. The investigation of structure-property-processing relationships of polymer molecular structures, physical properties, and processing behaviors is transforming the field of new materials for AM. Even though novel, functional materials for AM continue to be developed, requirements that render a polymeric material printable remain unknown or vague for most AM processes. Materials and printers are usually developed separately, which creates a disconnect between the material printing requirements and fundamental physical properties that enable successful printing. Through the interface of chemistry, biology, chemical engineering, and mechanical engineering, this dissertation aims to relate printability of polymeric materials with three types of AM processes, namely vat photopolymerization, binder jetting, and powder bed fusion. Binder jetting, vat photopolymerization, and powder bed fusion require different viscosity and powder requirements depending on the printer capabilities, and if the material is neat or in solution. Developing scaling relationships between solution viscosity and concentration determined critical overlap (C*) and entanglement (Ce) concentrations, which are related to the printability of the materials. For example, this dissertation discusses and investigates the maximum printable concentration in binder jetting of multiple polymer architectures in solution as a function of C* values of the polymer. For thermal-type printheads, C* appeared to be the highest jettable concentration, which asserted an additional method of material screening for binder jetting. Another investigation of the photokinetics as a function of concentration of photo-active polymers in solution revealed increased viscosity leads to decreased acrylate/acrylamide conversion. Lastly, investigating particle size and shape of poly(stearyl acrylate) particles synthesized through suspension polymerization revealed a combination of crosslinked and linear polymers produced high resolution parts for phase change materials. These analytical screening methods will help the progression of AM and provide future scientists and engineers a better guideline for material screenings.ETDIn Copyrightadditive manufacturingbinder jettingvat photopolymerizationRAFT polymerizationpoly(vinyl pyrrolidone)ring-opening polymerizationphoto-kineticsDissertation