Talamadupula, Krishna Kiran2022-03-062022-03-062020-09-11vt_gsexam:26961http://hdl.handle.net/10919/109180Polymer bonded explosives (PBXs) are composites comprised of energetic crystals with a very high energy density surrounded by a polymer binder. The formation of hotspots within polymer bonded explosives can lead to the thermal decomposition and initiation of the energetic material. A frictional heating model is applied at the mesoscale to assess the potential for the formation of hotspots under low velocity impact loadings. Monitoring of the formation and growth of damage at the mesoscale is considered through the inclusion of a piezoresistive carbon nanotube network within the energetic binder providing embedded strain and damage sensing. A coupled multiphysics thermo-electro-mechanical peridynamics framework is developed to perform computational simulations on an energetic material microstructure subject to these low velocity impact loads. With increase in impact energy, the model predicts larger amounts of sensing and damage thereby supporting the use of carbon nanotubes to assess damage growth and subsequent formation of hotspots. The framework is also applied to assess the combined effects of thermal loading due to prescribed hotspots with inertial effects due to low velocity impact loading. It has been found that the present model is able to detect the presence of hotspot dominated regions within the energetic material through the piezoresistive sensing mechanism. The influence of prescribed hotspots on the thermo-electro-mechanical response of the energetic material under a combination of thermal and inertial loading was observed to dominate the lower velocity impact response via thermal shock damage. In contrast, the higher velocity impact energies demonstrated an inertially dominated damage response. Quantifying the piezoresistive effect derived from embedding carbon nanotubes in polymers remains a challenge since these nanocomposites exhibit significant variation in their electro-mechanical properties depending upon factors such as CNT volume fraction, CNT dispersion, CNT alignment and properties of the polymer. Of interest is electrical percolation where the electrical conductivity of the CNT/polymer nanocomposite increases through orders of magnitude with increase in CNT volume fraction. Estimates and distributions for the electrical conductivity and piezoresistive coefficients of the CNT/polymer nanocomposite are obtained and analyzed with increasing CNT volume fraction and varying barrier potential, which is a parameter that controls the extent of electron tunneling. The effect of CNT alignment is analyzed by comparing the electro-mechanical properties in the alignment direction versus the transverse direction for different orientation conditions. Estimates of piezoresistive coefficients are converted into gage factors and compared with experimental sources in literature. The methodology for this work uses automated scripts which are used in conjunction with high performance computing to generate several 5 μm ×5 μm realizations for different CNT volume fractions. These realizations are then analyzed using finite elements to obtain volume averaged effective values, which are then subsequently used to generate measures of central tendency (estimated mean) and variability (standard deviation, coefficient of variation, skewness and kurtosis) in a descriptive statistical analysis.ETDIn Copyrightperidynamicspolymer nanocompositesmicrostructurepiezoresistivitycarbon nanotubeenergetic materialsdamagefrictionhotspotselectron tunnelinggage factorpercolationorientationalignmentwavyDissertation