Ding, ChaoMei, YunhuiNgo, Khai D. T.Lu, Guo-Quan2019-07-082019-07-082019-06-22Ding, C.; Mei, Y.; Ngo, K.D.T.; Lu, G. A (Permalloy + NiZn Ferrite) Moldable Magnetic Composite for Heterogeneous Integration of Power Electronics. Materials 2019, 12, 1999.http://hdl.handle.net/10919/91200Soft magnetic moldable composites (SM²Cs) would be ideally suited for the integration of magnetic components in power electronic converters because they can be formed into magnetic cores by low-temperature and pressure-less processing. However, most SM²Cs have low relative magnetic permeability, typically less than 30, and high core-loss densities at switching frequencies over 1 MHz. To improve their magnetic properties, we combine powders of Permalloy and a NiZn ferrite with an acrylic polymer to formulate a paste of SM²C. The paste can be molded and then cured below 200 °C without pressure to form cores with a relative permeability over 35 and a core-loss density at 1 MHz, 30% lower than those of commercial cores. The ease of its processing and high-performance properties makes the SM²C a good candidate material for the integration of power magnetics.application/pdfenIn Copyrightheterogeneous integration of power magneticssoft magnetic moldable composite (SM2C)Permalloy + NiZn ferrite powdered corelow-temperature and pressure-less processingArticle - Refereed2019-06-28https://doi.org/10.3390/ma12121999