Singh, Sahdev2014-03-142014-03-141993etd-12302008-063343http://hdl.handle.net/10919/46442Economic viability of fish production in recirculating aquaculture system (RAS) facility depends on minimizing the energy requirements of operating such facilities. The fish growth and water quality aspects of RAS have been studied in considerable details. However, the understanding of the thermal environment of RAS lags behind. A step-wise steady-state thermal model was developed to simulate the daily heating, ventilation, water pumping, biofilter operation, and lighting energy requirements over a production cycle. The model was validated using temperature and energy data collected from RAS facility of Virginia Tech during 1992. Model simulations were performed with various production scenarios. The energy cost of fish production ($/kg) was used to evaluate different scenarios with and without heat recovery from discharged system water. Building heating required the most (40 % - 70 % of total) energy followed by water pumping, biofilter operation, lighting, and ventilation. Water replacement was the most dominant factor in determining the facility’s heating energy requirement. Heat recovery from discharged system water indicated significant drop (up to 40 %) in energy cost of fish production.xi, 146 leavesBTDapplication/pdfenIn CopyrightLD5655.V855 1993.S564Aquacultural engineering -- ModelsFish hatcheriesHeat -- Transmission -- ModelsThesishttp://scholar.lib.vt.edu/theses/available/etd-12302008-063343/