Vosteen, Louis F.2021-07-222021-07-221955http://hdl.handle.net/10919/104273The temperature distributions encountered in thin solid wings subjected to aerodynamic heating induce thermal stresses that may effectively reduce the stiffness of the wing. The effects of this reduction in stiffness were investigated experimentally by rapidly heating the edges of a cantilever plate. The midplane thermal stresses imposed by the nonuniform temperature distribution caused the plate to buckle torsionally, increased the deformations of the plate under a constant applied torque, and reduced the frequency of the first bending and first torsion modes of vibration. By using small-deflection theory and employing energy methods, the effect of nonuniform heating on the plate stiffness was calculated. The theory predicts the general effects of the thermal stresses, but becomes inadequate as the edge-to-center temperature difference increases and plate deflections become large.61 leavesapplication/pdfenIn CopyrightLD5655.V855 1955.V377Thermal stressesThesis