Rodriguez Arriaga, Eduardo2018-12-232018-12-232017-06-30vt_gsexam:11234http://hdl.handle.net/10919/86523Field-based liquefaction evaluation procedures include the stress-based, strain-based, and energybased based approaches. The existence of a volumetric threshold shear strain, γtv, under which there is no development of excess pore pressures, and the unique relationship between pore pressure ratio and cyclic shear strain, γc, make a compelling argument for using a strain-based approach. However, the cyclic strain approach has not yet been standardized for field evaluations. The primary objective of this thesis is to use published databases of 415 shear-wave velocity and 230 Standard Penetration Test liquefaction field case histories to investigate the performance of the cyclic strain approach for the evaluation of initial liquefaction relative to the cyclic stress approach. Additionally, the concept of the γtv is expressed in terms of the peak ground surface acceleration and defined as the threshold amax. Computing (amax)t could provide a fast and simple evaluation for initial liquefaction, where no liquefaction is expected for a minimum computed (amax)t determined from the case histories. The variant of the strain-based procedure proposed herein avoids the direct need for laboratory cyclic testing by employing pore pressure generation models that are functions of cyclic shear strain, number of equivalent cycles, and relative density to predict initial liquefaction. The results from the proposed procedure are compared with those of the stress-based approach to determine which better matches the field observations of the case histories. It was found that the cyclic strain approach resulted in 70% to 77% correct predictions. In contrast, the cyclic stress approach yielded 87% to 90% correct predictions. The reasons why the predictions were not always correct with the cyclic strain approach are due to inherent limitations of the cyclic strain approach. Most significantly, an inherent and potentially fatal limitation of the strain-based procedure is it ignoring the softening of the soil stiffness due to excess pore pressure in representing the earthquake loading in terms of γc and neqγ.ETDIn Copyrightliquefactioncyclic strain approachthreshold strainpore pressure generationThesis