Meyers, Carol Ann2014-03-142014-03-141990etd-04252009-040844http://hdl.handle.net/10919/42238This paper discusses an investigation into thermal buckling and post-buckling of symmetrically laminated composite plates. In this study, thermal buckling is investigated for laminates under two different simple support conditions, fixed and sliding. These laminates are subjected to the conditions of a uniform temperature change and a linearly varying temperature change along the length of the plate. Postbuckling in the presence of a uniform temperature change and nonlinear response to imperfections in the form of a thermal gradient through the thickness of the plate and a lack of initial flatness are also studied. The buckling response is studied using variational methods, specifically the Trefftz criterion. Postbuckling and responses to imperfections are studied using nonlinear equilibrium conditions. A Rayleigh-Ritz formulation is used to obtain numerical results from the formulations for the prebuckling response, the buckling response, and the post-buckling and imperfection responses. The analyses are applied to graphite-reinforced materials with (± 45/0₂)_s and (± 45/0/90)_s lamination sequences. Numerical results are obtained for these laminates and also for the case of these laminates being rotated 30° inplane. For the first laminate, for example, such a rotation results in a (+75/ — 15/30₂)_s. stacking sequence. Such skewing of the principal material directions may be encountered when using fiber-reinforced materials in a structurally tailored design. In addition, the influence on thermal buckling of a lack of ideal boundary conditions in the form of boundary compliance and thermal expansion, which would occur in any real set-up, are investigated.x, 141 leavesBTDapplication/pdfenIn CopyrightLD5655.V855 1990.M496Composite constructionLaminated materialsThesishttp://scholar.lib.vt.edu/theses/available/etd-04252009-040844/