Virginia TechJewell, J. M.Williams, Glen M.Jaganathan, J.Aggarwal, I. D.Greason, P.2014-04-162014-04-161991-07-01Jewell, JM; Williams, GM; Jaganathan, J; et al., "Separation of Intrinsic and extrinsic Optical-Absorption in a Fluoride Glass," Appl. Phys. Lett. 59, 1 (1991); http://dx.doi.org/10.1063/1.1055640003-6951http://hdl.handle.net/10919/47408The contribution of impurity ions to the total optical absorption of a heavy metal fluoride glass has been determined at 532 and 1064 nm. Four ZrF4-BaF2-LaF3-AlF3-NaF glasses were prepared from various purity raw materials. The absorption coefficients of these glasses range from 0.92 to 45.4 x 10(-4) cm-1 at 1064 nm and from 7.43 to 11.1 X 10(-4) cm-1 at 532 nm as determined by laser calorimetry. The concentrations of Fe, Ni, Cu, and Co ions in each glass were determined by graphite furnace atomic absorption spectroscopy. These two measurements enable the absorption, due to transition metal ions to be differentiated from the intrinsic absorption of the glass. At 1064 nm, the absorption coefficient of these glasses is controlled entirely by the transition metal ion content. However, at 532 nm, the absorption by the transition metal ions accounts for 4-42% of the total absorption depending on impurity concentration. The intrinsic absorption of this fluoride glass calculated from these data at 532 nm is (7.69 +/- 0.99) X 10(-4) cm-1.application/pdfenIn CopyrightLaser calorimetryMetalArticle - Refereedhttp://scitation.aip.org/content/aip/journal/apl/59/1/10.1063/1.105564https://doi.org/10.1063/1.105564