Tu, Jie2014-03-142014-03-141988-05-05etd-06102012-040330http://hdl.handle.net/10919/43063Solid-state reaction and sol-gel, processing techniques were used extensively to form chemically-modified mullite solid solutions in an effort to lower their thermal expansion coefficients. TiO₂, B₂O₃, CrPO₄, P2O₅, Ga₂O₃, Cr2O₃, and WO₃ and the half-breed SiO₂ compounds AlPas, BPO₄, GaPO₄, BAsO₄, AIAsO₄, GaAsO₄, and GeO₂ were chosen as the modifiers. The results indicate that, apart from TiO₂, none of the substitutions made in mullite significantly change the thermal expansion properties. The solubility of 3 wt% TiO₂ in mullite reduces the coefficient of thermal expansion by about 10%; That corresponds to a reduction in AAl₂O₃/SiO₂ molar ratio ( < 1.5) compared to stoichiometric mullite (3Al₂O₃·2SiO₂). The formation of TiO₂-modified mullite depends on processing condition and heat treatment. The possible mechanism of lowering the CTE of mullite by the addition of TiO₂ is discussed in terms of the bond strength. The axial expansion of a Ga2O₃-modified mullite was measured' up to 1200°C to show that the expansion is increased along the c-axis compared with that of the stoichiometric mullite.vii, 53 leavesBTDapplication/pdfenIn CopyrightLD5655.V855 1988.T84Ceramic materialsMulliteThesishttp://scholar.lib.vt.edu/theses/available/etd-06102012-040330/