Goltsman, Alexander Mark2014-03-142014-03-142011-11-11etd-12202011-114328http://hdl.handle.net/10919/36351This project was born out of the work performed by a group of researchers at the New Jersey Institute of Technology (NJIT) [1] [2] [3] working on interferometric imaging with a spiral array. Their investigation stopped at two dimensional imaging with a two dimensional array. In this thesis, their idea was developed further into the significantly more complex imaging with a three dimensional array. The general design of the NJIT [1] [2] [3] experiment was reproduced, studied, and modified in a manner that was theorized to enhance the experiment with the added ability to perform three dimensional imaging. The NJIT team [1] [2] [3] has developed their experiment to where they were able to accurately perform two dimensional imaging of two sources of equal intensity located at different distances from a spiral array. In this thesis, the equations used for two dimensional imaging are extrapolated into a three dimensional array application. This three dimensional imaging concept is simulated with MATLAB and the results presented and compared to the NJIT experimental results. [1] [2] [3] A proof of concept physical experiment is conducted and the results are compared to the MATLAB simulation. The results show that additional spatial information can be obtained from a three dimensional array that can enhance the information gleaned from images.In CopyrightTerahertzinterferometryinterferometricthree dimensional imagingThesishttp://scholar.lib.vt.edu/theses/available/etd-12202011-114328/