Center for Photonics Technology

Permanent URI for this community

https://hdl.handle.net/10919/24790
The Center for Photonics Technology at Virginia Tech is focused on innovation in fiber optics, fiber optic sensors, and biomedical and applied optics. With five faculty and over 30 students and research staff, CPT is a world leader in fiber optic sensor research.

Browse

Browsing Center for Photonics Technology by Author "Homa, Daniel S."

Now showing 1 - 3 of 3
  • Thumbnail Image
    Coupled Mode Analysis for 3D Stress-Free Elastic Acoustic Waveguide
    He, Jiaji; Homa, Daniel S.; Pickrell, Gary R.; Wang, Anbo (IEEE, 2019)
    Acoustic sensors and acoustic measurements receive much attention in various applications. Because waveguides are commonly used in sensor design, theoretical means to study acoustic propagation and interaction in waveguides are necessary. However, current methods for elastic wave coupling, including the transfer matrix method and coupled mode theory in planar 2D waveguides, are not satisfactory. In this work, a coupled mode analysis for acoustic waves in 3D stress-free elastic waveguides is proposed. Similar to the coupled mode theory in optical waveguides, the analysis is presented by the evolution of modal amplitudes. It can solve various modal conversion and scattering problems in elastic waveguides with small changes of cross sections and stress-free boundaries. To demonstrate the practicability, the coupled mode analysis is used to calculate the reflection spectrum of the newly proposed structure, the acoustic fiber Bragg grating. In a notch-based grating fabricated on a thin cylindrical waveguide, the results from coupled mode analysis are in good agreement with those from the transfer matrix method, which has been already validated experimentally. The coupled mode analysis is a promising method to solve various scattering problems.
  • Thumbnail Image
    Dissolution and Diffusion-Based Reactions within YBa2Cu3O7-x Glass Fibers
    Heyl, Hanna; Yang, Shuo; Homa, Daniel S.; Slebodnick, Carla; Wang, Anbo; Pickrell, Gary R. (MDPI, 2019-12-20)
    This work presents a thorough identification and analysis of the dissolution and diffusion-based reaction processes that occur during the drawing of YBa2Cu3O7-x (YBCO) glass-clad fibers, using the molten-core approach, on a fiber draw tower in vacuum and in oxygen atmospheres. The results identify the dissolution of the fused silica cladding and the subsequent diffusion of silicon and oxygen into the molten YBCO core. This leads to a phase separation due to a miscibility gap which occurs in the YBCO–SiO2 system. Due to this phase separation, silica-rich precipitations form upon quenching. XRD analyses reveal that the core of the vacuum as-drawn YBCO fiber is amorphous. Heat-treatments of the vacuum as-drawn fibers in the 800–1200 °C range show that cuprite crystallizes out of the amorphous matrix by 800 °C, followed by cristobalite by 900 °C. Heat-treatments at 1100 °C and 1200 °C lead to the formation of barium copper and yttrium barium silicates. These results provide a fundamental understanding of phase relations in the YBCO–SiO2 glass-clad system as well as indispensable insights covering general glass-clad fibers drawn using the molten-core approach.
  • Thumbnail Image
    Powder-in-Tube Reactive Molten-Core Fabrication of Glass-Clad BaO-TiO2-SiO2 Glass–Ceramic Fibers
    Yang, Shuo; Heyl, Hanna; Homa, Daniel S.; Pickrell, Gary R.; Wang, Anbo (MDPI, 2020-01-15)
    In this paper we report the fabrication of glass-clad BaO-TiO2-SiO2 (BTS) glass–ceramic fibers by powder-in-tube reactive molten-core drawing and successive isothermal heat treatment. Upon drawing, the inserted raw powder materials in the fused silica tubing melt and react with the fused silica tubing (housing tubing) via dissolution and diffusion interactions. During the drawing process, the fused silica tubing not only serves as a reactive crucible, but also as a fiber cladding layer. The formation of the BTS glass–ceramic structure in the core was verified by micro-Raman spectroscopy after the successive isothermal heat treatment. Second-harmonic generation and blue-white photoluminescence were observed in the fiber using 1064 nm and 266 nm picosecond laser irradiation, respectively. Therefore, the BTS glass–ceramic fiber is a promising candidate for all fiber based second-order nonlinear and photoluminescence applications. Moreover, the powder-in-tube reactive molten core method offers a more efficient and intrinsic contamination-free approach to fabricate glass–ceramic fibers.