Center for Intelligent Material Systems and Structures (CIMSS)

Permanent URI for this community

https://hdl.handle.net/10919/24823

Browse

Browsing Center for Intelligent Material Systems and Structures (CIMSS) by Author "Center for Energy Harvesting Materials and Systems (CEHMS)"

Now showing 1 - 8 of 8
  • Thumbnail Image
    Direct and converse effect in magnetoelectric laminate composites
    Cho, Kyung-Hoon; Priya, Shashank (AIP Publishing, 2011-06-01)
    In this letter, we analyze the direct and converse effect in laminate composites of magnetostrictive and piezoelectric materials. Our results deterministically show that direct magnetoelectric (ME) effect is maximized at antiresonance frequency while the converse ME effect is maximized at resonance frequency of the laminate composite. We explain this phenomenon by using piezoelectric constitutive equations and combining it with resonance boundary conditions. The dominant factor controlling the position of peak ME coefficient was found to be frequency dependent capacitance of piezoelectric layer. This study will provide guidance toward the development of magnetic field sensors based on direct effect and communication components based on converse effect. (C) 2011 American Institute of Physics. [doi:10.1063/1.3584863]
  • Thumbnail Image
    Electromechanical behavior of 001 -textured Pb(Mg1/3Nb2/3)O-3-PbTiO3 ceramics
    Yan, Yongke; Wang, Yu. U.; Priya, Shashank (AIP Publishing, 2012-05-01)
    [001]-textured Pb(Mg1/3Nb2/3)O-3-PbTiO3 (PMN-PT) ceramics were synthesized by using templated grain growth method. Significantly high [001] texture degree corresponding to 0.98 Lotgering factor was achieved at 1 vol. % BaTiO3 template. Electromechanical properties for [001]-textured PMN-PT ceramics with 1 vol. % BaTiO3 were found to be d(33) = 1000 pC/N, d(31) = 371 pC/N, epsilon(r) 2591, and tan delta = similar to 0.6%. Elastoelectric composite based modeling results showed that higher volume fraction of template reduces the overall dielectric constant and thus has adverse effect on the piezoelectric response. Clamping effect was modeled by deriving the changes in free energy as a function of applied electric field and microstructural boundary condition. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.4712563]
  • Thumbnail Image
    Ferroelectric properties and dynamic scaling of < 100 > oriented (K0.5Na0.5)NbO3 single crystals
    Gupta, Sanjay; Priya, Shashank (AIP Publishing, 2011-06-01)
    In this letter, we report the dielectric and ferroelectric (FE) characteristics of potassium sodium niobate (K0.5Na0.5NbO3) single crystals grown by flux method. Orientation analysis of as-grown cubical-shaped crystals was conducted by electron backscattered diffraction technique revealing the < 100 > crystallographic orientation of two opposing major faces. Annealed crystals were found to exhibit FE orthorhombic to FE tetragonal transition temperature of 200 degrees C and Curie temperature of 407 degrees C. Poled < 100 > oriented crystals had longitudinal piezoelectric constant of 148 pC/N. Dielectric measurement as a function of temperature was conducted to determine the second order parameter in Gibbs free energy expansion. Dynamic hysteresis analysis on these crystals showed the power law relations to be of the form < A > proportional to f(0.47Eo-0.85)E(o)(1.45f0.14) and < A > proportional to f(0.04)E(o) below and above the coercive field. (C) 2011 American Institute of Physics. [doi:10.1063/1.3600058]
  • Thumbnail Image
    Giant energy density in 001 -textured Pb(Mg1/3Nb2/3)O-3-PbZrO3-PbTiO3 piezoelectric ceramics
    Yan, Yongke; Cho, Kyung-Hoon; Maurya, Deepam; Kumar, Amit; Kalinin, Sergei; Khachaturyan, Armen G.; Priya, Shashank (AIP Publishing, 2013-01-01)
    Pb(Zr,Ti)O-3 (PZT) based compositions have been challenging to texture or grow in a single crystal form due to the incongruent melting point of ZrO2. Here we demonstrate the method for achieving 90% textured PZT-based ceramics and further show that it can provide highest known energy density in piezoelectric materials through enhancement of piezoelectric charge and voltage coefficients (d and g). Our method provides more than similar to 5x increase in the ratio d(textured)/d(random). A giant magnitude of d.g coefficient with value of 59 000 x 10(-15) m(2) N-1 (comparable to that of the single crystal counterpart and 359% higher than that of the best commercial compositions) was obtained. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4789854]
  • Thumbnail Image
    Giant self-biased magnetoelectric coupling in co-fired textured layered composites
    Yan, Yongke; Zhou, Yuan; Priya, Shashank (AIP Publishing, 2013-02-01)
    Co-fired magnetostrictive/piezoelectric/magnetostrictive laminate structure with silver inner electrode was synthesized and characterized. We demonstrate integration of textured piezoelectric microstructure with the cost-effective low-temperature co-fired layered structure to achieve strong magnetoelectric coupling. Using the co-fired composite, a strategy was developed based upon the hysteretic response of nickel-copper-zinc ferrite magnetostrictive materials to achieve peak magnetoelectric response at zero DC bias, referred as self-biased magnetoelectric response. Fundamental understanding of self-bias phenomenon in composites with single phase magnetic material was investigated by quantifying the magnetization and piezomagnetic changes with applied DC field. We delineate the contribution arising from the interfacial strain and inherent magnetic hysteretic behavior of copper modified nickel-zinc ferrite towards self-bias response. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4791685]
  • Thumbnail Image
    High thermal stability of piezoelectric properties in (Na0.5Bi0.5TiO3)(x)-(BaTiO3)(y)-(Na0.5K0.5NbO3)(1-x-y) ceramics
    Gupta, Sanjay; Priya, Shashank (AIP Publishing, 2013-01-01)
    We report the piezoelectric and ferroelectric properties of (Na0.5Bi0.5TiO3)(x)-(BaTiO3)(y)-(Na0.5K0.5NbO3)(1-x-y) ceramics for Na0.5K0.5NbO3 rich end of composition (x, y <= 0.04 mol. %). These compositions were found to exhibit significantly improved thermal stability of piezoresponse. Variation of dielectric constant as a function of temperature revealed that orthorhombic-tetragonal (To-t) and tetragonal-cubic (T-c) transition temperatures for these compositions were in the vicinity of 0 degrees C and 330 degrees C, respectively. Dynamic scaling and temperature dependent X-ray diffraction analysis were conducted. Results are discussed in terms of intrinsic and extrinsic contributions to the piezoelectric response explaining the temperature dependent behavior. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4773983]
  • Thumbnail Image
    Phase transition and temperature stability of piezoelectric properties in Mn-modified Pb(Mg1/3Nb2/3)O-3-PbZrO3-PbTiO3 ceramics
    Yan, Yongke; Kumar, Amit; Correa, Margarita; Cho, Kyung-Hoon; Katiyar, Ram S.; Priya, Shashank (AIP Publishing, 2012-04-01)
    This study investigates the effect of two different Mn modifiers [MnO2 and Pb(Mn1/3Nb2/3)O-3(PMnN)] on the of phase transitions in Pb(Mg1/3Nb2/3)O-3-PbZrO3-PbTiO3 ceramics. The temperature dependence of polarization derived from measured pyroelectric current indicated change in nature of phase transition with MnO2 doping. This phenomenon was supported by the temperature evolution of the linear softening of low lying hard lattice mode as revealed by Raman analysis. The grain size was found to increase with MnO2 doping (5X) while decrease with PMnN modification (0.5X). Interestingly, the piezoelectric constant of MnO2 modified composition showed negligible degradation (<1%) even after heat treatment very close to the ferroelectric-paraelectric transition temperature. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.3703124]
  • Thumbnail Image
    Piezoelectric properties and temperature stability of Mn-doped Pb(Mg1/3Nb2/3)-PbZrO3-PbTiO3 textured ceramics
    Yan, Yongke; Cho, Kyung-Hoon; Priya, Shashank (AIP Publishing, 2012-03-01)
    In this letter, we report the electromechanical properties of textured 0.4Pb(Mg1/3Nb2/3) O-3-0.25PbZrO(3)-0.35PbTiO(3) (PMN-PZT) composition which has relatively high rhombohedral to tetragonal (R-T) transition temperature (TR-T of 160 degrees C) and Curie temperature (T-C of 234 degrees C) and explore the effect of Mn-doping on this composition. It was found that MnO2-doped textured PMN-PZT ceramics with 5 vol.% BaTiO3 template (T-5BT) exhibited inferior temperature stability. The coupling factor (k(31)) of T-5BT ceramic started to degrade from 75 degrees C while the random counterpart showed a very stable tendency up to 180 degrees C. This degradation was associated with the "interface region" formed in the vicinity of BT template. MnO2 doped PMN-PZT ceramics textured with 3 vol.% BT and subsequently poled at 140 degrees C (T-3BT140) exhibited very stable and high k(31) (>0.53) in a wide temperature range from room temperature to 130 degrees C through reduction in the interface region volume. Further, the T-3BT140 ceramic exhibited excellent hard and soft combinatory piezoelectric properties of d(33) = 720 pC/N, k(31) = 0.53, Q(m) = 403, delta = 0.3% which are very promising for high power and magnetoelectric applications. (C) 2012 American Institute of Physics. [http://dx.doi.org/10.1063/1.3698157]