Adhikari, Sailesh; Bond, Brian H.; Quesada, Henry Jose (2024-02)
The economic feasibility of producing structural-grade hardwood lumber (SGHL) that qualifies as a raw material for structurally rated cross-laminated timber (CLT) was examined. 126 yellow poplar logs from diameters 12 to 15 inches were selected and divided into test and control samples. A log yield study was then conducted of the yield and revenue generated when producing lumber graded with National Hardwood Lumber Association (NHLA) rules, SGHL rules, and a mix of both rules (NHLA and SGHL-graded lumber). Producing mix-grade lumber added approximately 27% more revenue than producing NHLA-grade lumber on average if sawmills adopt a cant sawing method. Mix-grade lumber production resulted in 32% of the total volume produced as SGHL and the remaining 68% as NHLA lumber. As a result, 2 Common and lower-grade lumber board footage was reduced to only 29% in test samples and remained converted into SGHL compared to more than 85% of 2 Common and lower-grade lumber boards for control samples. 95% of the SGHL produced as mixed-graded lumber with NHLA-grade lumber met the specifications required to produce structural CLT, and the remaining 5% can be utilized to produce non-structural grade CLTs if they meet the minimum requirement of the materials for CLT production.