Browsing by Author "Akbar, Muhammad"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Chip-Scale Gas Chromatography
    Akbar, Muhammad (Virginia Tech, 2015-09-04)
    Instrument miniaturization is led by the desire to perform rapid diagnosis in remote areas with high throughput and low cost. In addition, miniaturized instruments hold the promise of consuming small sample volumes and are thus less prone to cross-contamination. Gas chromatography (GC) is the leading analytical instrument for the analysis of volatile organic compounds (VOCs). Due to its wide-ranging applications, it has received great attention both from industrial sectors and scientific communities. Recently, numerous research efforts have benefited from the advancements in micro-electromechanical system (MEMS) and nanotechnology based solutions to miniaturize the key components of GC instrument (pre-concentrator/injector, separation column, valves, pumps, and the detector). The purpose of this dissertation is to address the critical need of developing a micro GC system for various field- applications. The uniqueness of this work is to emphasize on the importance of integrating the basic components of μGC (including sampling/injection, separation and detection) on a single platform. This integration leads to overall improved performance as well as reducing the manufacturing cost of this technology. In this regard, the implementation of micro helium discharge photoionization detector (μDPID) in silicon-glass architecture served as a major accomplishment enabling its monolithic integration with the micro separation column (μSC). For the first time, the operation of a monolithic integrated module under temperature and flow programming conditions has been demonstrated to achieve rapid chromatographic analysis of a complex sample. Furthermore, an innovative sample injection mechanism has been incorporated in the integrated module to present the idea of a chip-scale μGC system. The possibility of using μGC technology in practical applications such as breath analysis and water monitoring is also demonstrated. Moreover, a nanotechnology based scheme for enhancing the adsorption capacity of the microfabricated pre-concentrator is also described.
  • Thumbnail Image
    GC-on-chip: integrated column and photoionization detector
    Akbar, Muhammad; Shakeel, Hamza; Agah, Masoud (The Royal Society of Chemistry, 2015-02-04)
    This paper reports a unique GC-on-chip module comprising a monolithically integrated semi-packed micro separation column (μSC) and a highly sensitive micro helium discharge photoionization detector (μDPID). While semi-packed μSC with atomic layer deposited (ALD) alumina as a stationary phase provides high separation performance, the μDPID implemented for the first time in a silicon–glass architecture inherits the desirable features of being universal, non-destructive, low power consumption (1.4 mW), and responsive. The integrated chip is 1.5 cm × 3 cm in size and requires a two-mask fabrication process. Monolithic integration alleviates the need for transfer lines between the column and the detector which improves the performance of the individual components with overall reduced fabrication and implementation costs. The chip is capable of operating under the isothermal as well as temperature and flow programming conditions to achieve rapid chromatographic analysis. The chip performance was investigated with two samples: 1) a multi-analyte gas mixture consisting of eight compounds ranging from 98 °C to 174 °C in boiling point and 2) a mixture containing higher alkanes (C9–C12). Our experiments indicate that the chip is capable of providing rapid chromatographic separation and detection of these compounds (<1 min) through the optimization of flow and temperature programming conditions. The GC-on-chip demonstrated a minimum detection limit of ~10 pg which is on a par with the widely used destructive flame ionization detector (FID).
  • Thumbnail Image
    A purge and trap integrated microGC platform for chemical identification in aqueous samples
    Akbar, Muhammad; Narayanan, Shree; Restaino, Michael; Agah, Masoud (The Royal Society of Chemistry, 2014-05-19)
    The majority of current micro-scale gas chromatography (_GC) systems focus on air sampling to detect volatile organic compounds (VOCs). However, purging the VOCs from a water sample using microsystems is an unchartered territory. Various organic compounds used in everyday life find their way to water bodies. Some of these water organic compounds (WOCs) persist or degrade slowly, threatening not just human existence but also aquatic life. This article reports the first micro-purge extractor (_PE) chip and its integration with a micro-scale gas chromatography (_GC) system for the extraction and analysis of water organic compounds (WOCs) from aqueous samples. The 2 cm _ 3 cm _PE chip contains two inlet and outlet ports and an etched cavity sealed with a Pyrex cover. The aqueous sample is introduced from the top inlet port while a pure inert gas is supplied from the side inlet to purge WOCs from the _PE chip. The outlets are assigned for draining water from the chip and for directing purged WOCs to the micro-thermal preconcentrator (_TPC). The trapped compounds are desorbed from the _TPC by resistive heating using the on-chip heater and temperature sensor, are separated by a 2 m long, 80 _m wide, and 250 _m deep polydimethylsiloxane (OV-1) coated _GC separation column, and are identified using a micro-thermal conductivity detector (_TCD) monolithically integrated with the column. Our experiments indicate that the combined system is capable of providing rapid chromatographic separation (<1.5 min) for quaternary WOCs namely toluene, tetrachloroethylene (PCE), chlorobenzene and ethylbenzene with a minimum detection concentration of 500 parts-per-billion (ppb) in aqueous samples. The proposed method is a promising development towards the future realization of a miniaturized system for sensitive, on-site and real-time field analysis of organic contaminants in water.