Browsing by Author "Angulo-Jaramillo, Rafael"

Now showing 1 - 5 of 5
  • Thumbnail Image
    BEST-WR: An adapted algorithm for the hydraulic characterization of hydrophilic and water-repellent soils
    Di Prima, Simone; Stewart, Ryan D.; Abou Najm, Majdi R.; Ribeiro Roder, Ludmila; Giadrossich, Filippo; Campus, Sergio; Angulo-Jaramillo, Rafael; Yilmaz, Deniz; Roggero, Pier Paolo; Pirastru, Mario; Lassabatere, Laurent (Elsevier, 2021-12-01)
    Water-repellent soils usually experience water flow impedance during the early stage of a wetting process followed by progressive increase of infiltration rate. Current infiltration models are not formulated to describe this peculiar process. Similarly, simplified methods of soil hydraulic characterization (e.g., BEST) are not equipped to handle water-repellent soils. Here, we present an adaptation of the BEST method, named BEST-WR, for the hydraulic characterization of soils at any stage of water-repellency. We modified the Haverkamp explicit transient infiltration model, included in BEST for modeling infiltration data, by embedding a scaling factor describing the rate of attenuation of infiltration rate due to water repellency. The new model was validated using analytically generated data, involving soils with different texture and a dataset that included data from 60 single-ring infiltration tests. The scaling factor was used as a new index to assess soil water repellency in a Mediterranean wooded grassland, where the scattered evergreen oak trees induced more noticeable water repellency under the canopies as compared to the open spaces. The new index produced results in line with those obtained using the water drop penetration time test, which is one of the most widely test applied for quantifying soil water repellency persistence. Finally, we used BEST-WR to determine the hydraulic characteristic curves under both hydrophilic and hydrophobic conditions.
  • Thumbnail Image
    Coupling time-lapse ground penetrating radar surveys and infiltration experiments to characterize two types of non-uniform flow
    Di Prima, Simone; Giannini, Vittoria; Ribeiro Roder, Ludmila; Giadrossich, Filippo; Lassabatere, Laurent; Stewart, Ryan D.; Abou Najm, Majdi R.; Longo, Vittorio; Campus, Sergio; Winiarski, Thierry; Angulo-Jaramillo, Rafael; Del Campo, Antonio; Capello, Giorgio; Biddoccu, Marcella; Roggero, Pier Paolo; Pirastru, Mario (Elsevier, 2021-09-17)
    Understanding linkages between heterogeneous soil structures and non-uniform flow is fundamental for interpreting infiltration processes and improving hydrological simulations. Here, we utilized ground-penetrating radar (GPR) as a non-invasive technique to investigate those linkages and to complement current traditional methods that are labor-intensive, invasive, and non-repeatable. We combined time-lapse GPR surveys with different types of infiltration experiments to create three-dimensional (3D) diagrams of the wetting dynamics. We carried out the GPR surveys and validated them with in situ observations, independent measurements and field excavations at two experimental sites. Those sites were selected to represent different mechanisms that generate non-uniform flow: (1) preferential water infiltration initiated by tree trunk and root systems; and (2) lateral subsurface flow due to soil layering. Results revealed links between different types of soil heterogeneity and non-uniform flow. The first experimental site provided evidence of root-induced preferential flow paths along coarse roots, emphasizing the important role of coarse roots in facilitating preferential water movement through the subsurface. The second experimental site showed that water infiltrated through the restrictive layer mainly following the plant root system. The presented approach offers a non-invasive, repeatable and accurate way to detect non-uniform flow.
  • Thumbnail Image
    Mixed formulation for an easy and robust numerical computation of sorptivity
    Lassabatere, Laurent; Peyneau, Pierre-Emmanuel; Yilmaz, Deniz; Pollacco, Joseph; Fernandez-Galvez, Jesus; Latorre, Borja; Moret-Fernandez, David; Di Prima, Simone; Rahmati, Mehdi; Stewart, Ryan D.; Abou Najm, Majdi; Hammecker, Claude; Angulo-Jaramillo, Rafael (Copernicus, 2023-02-24)
    Sorptivity is one of the most important parameters for the quantification of water infiltration into soils. proposed a specific formulation to derive sorptivity as a function of the soil water retention and hydraulic conductivity functions, as well as initial and final soil water contents. However, this formulation requires the integration of a function involving hydraulic diffusivity, which may be undefined or present numerical difficulties that cause numerical misestimations. In this study, we propose a mixed formulation that scales sorptivity and splits the integrals into two parts: the first term involves the scaled degree of saturation, while the second involves the scaled water pressure head. The new mixed formulation is shown to be robust and well-suited to any type of hydraulic function - even with infinite hydraulic diffusivity or positive air-entry water pressure heads - and any boundary condition, including infinite initial water pressure head, h -> -infinity. Lastly, we show the benefits of using the proposed formulation for modeling water into soil with analytical models that use sorptivity.
  • Thumbnail Image
    Parameterization of a comprehensive explicit model for single-ring infiltration
    Iovino, Massimo; Abou Najm, Majdi R.; Angulo-Jaramillo, Rafael; Bagarello, Vincenzo; Castellini, Mirko; Concialdi, Paola; Di Prima, Simone; Lassabatere, Laurent; Stewart, Ryan D. (Elsevier, 2021-10-01)
    Comprehensive infiltration models can simultaneously describe transient and steady-state infiltration behaviors, and therefore can be applied to a range of experimental conditions. However, satisfactory model accuracy requires proper parameterization, including estimating the transition time from transient to steady-state flow conditions (τcrit). This study focused on improving the estimation of two parameters – τcrit and a second constant called a – used in a comprehensive, explicit, two-term model for single ring infiltration (hereafter referred to as the SA model). Different studies have recommended that a should be as low as 0.45 to as high as 0.91. Furthermore, τcrit is often obtained a-priori by assuming that steady-state conditions are reached before the end of an infiltration run. However, there has not been a systematic analysis of those terms for different soils and infiltration conditions. To investigate these open issues related to the use of the SA model, here we introduce a novel, iterative method for estimating τcrit and the parameter a. We then applied this method to both analytical and experimental infiltration data, and compared it with two existing empirical methods. The analytical infiltration experiments showed that τcrit was approximately 1.5 times larger than the maximum validity time of a similar two-term transient infiltration model. Further, the iterative method for obtaining τcrit had minimal effects on the a term, which varied between 0.706 and 0.904 and was larger for finer soils and when small water sources were used. Application of the proposed method was less efficient with experimental data. Only ~ 33% of the experiments yielding plausible estimates of a (i.e., a < 1), indicating that these infiltration model parameters often have high uncertainty. The successful runs indicated that a depended on the rate at which the initial infiltration rate approached the final infiltration rate. Depending on the fitting algorithm used, a had mean values of 0.74–0.78, which were intermediate between those suggested by previous studies. Altogether, these findings expand the applicability of the SA model by providing new methods for estimating τcrit and by showing that a does not need to be fixed a-priori. We expect that these advances will result in more reliable estimations of soil hydrodynamic parameters, including hydraulic conductivity.
  • Thumbnail Image
    A scaling procedure for straightforward computation of sorptivity
    Lassabatere, Laurent; Peyneau, Pierre-Emmanuel; Yilmaz, Deniz; Pollacco, Joseph; Fernández-Gálvez, Jesús; Latorre, Borja; Moret-Fernández, David; Di Prima, Simone; Rahmati, Mehdi; Stewart, Ryan D.; Abou Najm, Majdi R.; Hammecker, Claude; Angulo-Jaramillo, Rafael (Copernicus, 2021-09-22)
    Sorptivity is a parameter of primary importance in the study of unsaturated flow in soils. This hydraulic parameter is required to model water infiltration into vertical soil profiles. Sorptivity can be directly estimated from the soil hydraulic functions (water retention and hydraulic conductivity curves), using the integral formulation of . However, calculating sorptivity in this manner requires the prior determination of the soil hydraulic diffusivity and its numerical integration between initial and final saturation degrees, which may be difficult in some situations (e.g., coarse soil with diffusivity functions that are quasi-infinite close to saturation). In this paper, we present a procedure to compute sorptivity using a scaling parameter, cp, that corresponds to the sorptivity of a unit soil (i.e., unit values for all parameters and zero residual water content) that is utterly dry at the initial state and saturated at the final state. The cp parameter was computed numerically and analytically for five hydraulic models: Delta (i.e., Green and Ampt), Brooks and Corey, van Genuchten-Mualem, van Genuchten-Burdine, and Kosugi. Based on the results, we proposed brand new analytical expressions for some of the models and validated previous formulations for the other models. We also tabulated the output values so that they can easily be used to determine the actual sorptivity value for any case. At the same time, our numerical results showed that the relation between cp and the hydraulic shape parameters strongly depends on the chosen model. These results highlight the need for careful selection of the proper model for the description of the water retention and hydraulic conductivity functions when estimating sorptivity.