VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!

Browsing by Author "Arisi, Allan Nyairo"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Heat Transfer and Flow Characteristics on the Rotor Tip and Endwall Platform Regions in a Transonic Turbine Cascade
    Arisi, Allan Nyairo (Virginia Tech, 2016-01-26)
    This dissertation presents a detailed experimental and numerical analysis of the aerothermal characteristics of the turbine extremity regions i.e. the blade tip and endwall regions. The heat transfer and secondary flow characteristics were analyzed for different engine relevant configurations and exit Mach/Reynolds number conditions. The experiments were conducted in a linear blowdown cascade at transonic high turbulence conditions of Mexit ~ 0.85, 0.60 and 1.0, with an inlet turbulence intensity of 16% and 12% for the vane and blade cascade respectively. Transient infrared (IR) thermography technique and surface pressure measurement were used to map out the surface heat transfer coefficient and aerodynamic characteristics. The experiments were complemented with computational modeling using the commercial RANS equation solver ANSYS Fluent. The CFD results provided further insight into the local flow characteristics in order to elucidate the flow physics which govern the measured heat transfer characteristics. The results reveal that the highest heat transfer exists in regions with local flow reattachment and new-boundary layer formation. Conversely, the lowest heat transfer occurs in regions with boundary layer thickening and separation/lift-off flow. However, boundary layer separation results in additional secondary flow vortices, such as the squealer cavity vortices and endwall auxiliary vortex system, which significantly increase the stage aerodynamic losses. Furthermore, these vortices result in a low film-cooling effectiveness as was observed on a squealer tip cavity with purge flow. Finally, the importance of transonic experiments in analyzing the turbine section heat transfer and flow characteristics was underlined by the significant shock-boundary layer interactions that occur at high exit Mach number conditions.