Browsing by Author "Dilek, Murat"

Now showing 1 - 3 of 3
  • Thumbnail Image
    Analyzing Impact of Distributed PV Generation on Integrated Transmission & Distribution System Voltage Stability — A Graph Trace Analysis Based Approach
    Bhatti, Bilal Ahmad; Broadwater, Robert; Dilek, Murat (MDPI, 2020-09-01)
    The use of a Graph Trace Analysis (GTA)-based power flow for analyzing the voltage stability of integrated Transmission and Distribution (T&D) networks is discussed in the context of distributed Photovoltaic (PV) generation. The voltage stability of lines and the load carrying capability of buses is analyzed at various PV penetration levels. It is shown that as the PV generation levels increase, an increase in the steady state voltage stability of the system is observed. Moreover, within certain regions of stability margin changes, changes in voltage stability margins of transmission lines are shown to be linearly related to changes in the loading of the lines. Two case studies are presented, where one case study involves a model with eight voltage levels and 784,000 nodes. In one case study, a voltage-stability heat map is used to demonstrate the identification of weak lines and buses.
  • Thumbnail Image
    Integrated Design of Electrical Distribution Systems: Phase Balancing and Phase Prediction Case Studies
    Dilek, Murat (Virginia Tech, 2000-12-01)
    Distribution system analysis and design has experienced a gradual development over the past three decades. The once loosely assembled and largely ad hoc procedures have been progressing toward being well-organized. The increasing power of computers now allows for managing the large volumes of data and other obstacles inherent to distribution system studies. A variety of sophisticated optimization methods, which were impossible to conduct in the past, have been developed and successfully applied to distribution systems. Among the many procedures that deal with making decisions about the state and better operation of a distribution system, two decision support procedures will be addressed in this study: phase balancing and phase prediction. The former recommends re-phasing of single- and double-phase laterals in a radial distribution system in order to improve circuit loss while also maintaining/improving imbalances at various balance point locations. Phase balancing calculations are based on circuit loss information and current magnitudes that are calculated from a power flow solution. The phase balancing algorithm is designed to handle time-varying loads when evaluating phase moves that will result in improved circuit losses over all load points. Applied to radial distribution systems, the phase prediction algorithm attempts to predict the phases of single- and/or double phase laterals that have no phasing information previously recorded by the electric utility. In such an attempt, it uses available customer data and kW/kVar measurements taken at various locations in the system. It is shown that phase balancing is a special case of phase prediction. Building on the phase balancing and phase prediction design studies, this work introduces the concept of integrated design, an approach for coordinating the effects of various design calculations. Integrated design considers using results of multiple design applications rather than employing a single application for a distribution system in need of improvement relative to some system aspect. Also presented is a software architecture supporting integrated design.
  • Thumbnail Image
    Transmission and Distribution Real-Time Analysis Software for Monitoring and Control: Design and Simulation Testing
    Zhu, Dan; Dilek, Murat; Zhong, Max; Parchure, Abhineet; Broadwater, Robert; Cincotti, Nicholas; Kutchen, Timothy; Placide, Scott; Watson, Luan (MDPI, 2023-05-16)
    The US electric grid is facing operational, stability, and security challenges. Transmission system operators need some measure of visibility into distribution system renewable generation. Distribution system generation needs to support transmission system voltage. The grid is experiencing an expansion in measurement systems. How to take full advantage of this expansion and defend against attacks, both cyber and physical, poses additional challenges. This paper introduces software designed to meet these challenges. At the center of the software is an Integrated System Model (ISM) that spans from transmission to secondary distribution. The ISM is employed in real-time abnormality detection, voltage stability forecasting, and multi-mode control. The software architecture along with selected analysis modules is presented. Testing results are presented for: 1—attacks on utility infrastructure; 2—energy savings from optimal control; 3—distribution system control response during a low voltage transmission system event; 4—cyber-attacks on PV inverters, where physical inverters are used in hardware-in-the-simulation-loop studies. Contributions of this work include real-time analysis that spans from three-phase transmission through secondary distribution; an approach for detecting abnormalities that employs measurements from three independent measurement systems; and a multi-mode distribution system control that responds to cyber-attacks, physical attacks, equipment failures, and transmission system needs.