Browsing by Author "Elahinia, Mohammad"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Effect of System Dynamics on Shape Memory Alloy Behavior and Control
    Elahinia, Mohammad (Virginia Tech, 2004-07-20)
    While the existing thermomechanical constitutive models can predict the behavior of SMA-actuated systems in most cases, in this study, we have shown that there are certain situations in which these models are not able to predict the behavior of SMAs. To this end, a rotary SMA-actuated robotic arm is modeled using the existing constitutive models. The model is verified against the experimental results to document that under certain conditions, the model is not able to predict the behavior of the SMA-actuated manipulator. Such cases most often occur when the temperature and stress of the SMA wire change simultaneously. The constitutive model discrepancy is also studied experimentally using a dead-weight that is actuated by an SMA wire. Subsequently, an enhanced phenomenological model is developed. The enhanced model is able to predict the behavior of SMAs under complex thermomechanical loadings. For the SMA-actuated robotic arm, several control methods are designed through simulations. A position-based PID controller is designed first, and it is found that this controller cannot perform well for all the desired angular positions(set-points). A Variable Structure Control (VSC) based on the angular position and velocity is presented that has a relatively better erformance for all the set-points. To improve the erformance of the VSC, in terms of the steady state error, an Extended Kalman Filter is designed and used to modify the VSC design. The modified VSC is based on the angular position and angular velocity of the actuator and the estimated temperature of the SMA wire. Furthermore, a Sliding Mode Controller is designed based on the stress of the SMA wire. Finally, a model-based Backstepping Controller is designed for the SMA-actuated arm. This model-bsed controller allows designing the controller parameters based on the parameters of the system. Additionally, the stability of the controller is studied. Using the Lyapunov stability analysis, it is shown that the model-based Backstepping Controller is able to asymptotically stabilize the system.
  • Thumbnail Image
    An SMA Passive Ankle Foot Orthosis: Design, Modeling, and Experimental Evaluation
    Deberg, Liberty; Taheri Andani, Masood; Hosseinipour, Milad; Elahinia, Mohammad (Hindawi, 2014-06-02)
    Shape memory alloys (SMAs) provide compact and effective actuation for avariety of mechanical systems. In this work, the distinguished superelastic behavior of these materials is utilized to develop a passive ankle foot orthosis to address the drop foot disability. Design, modeling, and experimental evaluation of an SMA orthosis employed in an ankle foot orthosis (AFO) are presented in this paper. To evaluate the improvements achieved with this new device, a prototype is fabricated and motion analysis is performed on a drop foot patient. Results are presented to demonstrate the performance of the proposed orthosis.