Browsing by Author "Esker, Alan R."
Now showing 1 - 20 of 128
Results Per Page
Sort Options
- Adsorption of Biomacromolecules onto Polysaccharide SurfacesZhang, Xiao (Virginia Tech, 2014-10-02)Plant cell wall polysaccharides are abundant natural polymers making them potential sources for sustainable and biodegradable materials. Interfacial behavior, including adsorption and enzymatic degradation, of several plant cell wall polysaccharides and their derivatives were studied with a quartz crystal microbalance with dissipation monitoring (QCM-D), surface plasmon resonance (SPR) and atomic force microscopy (AFM). Xyloglucan adsorption isotherms were obtained to probe how cellulose-hemicellulose interactions were affected by the type of cellulose substrate and molar mass of xyloglucan. Xyloglucan as small as a heptasaccharide still adsorbed irreversibly onto cellulose. Carboxymethyl cellulose (CMC) adsorption onto cellulose and viscoelastic properties and water contents of the adsorbed CMC layers were obtained from a combination of QCM-D and SPR data. The CMC samples formed hydrated and viscoelastic layers compared to the relatively rigid xyloglucan layer. Pectin model surfaces were prepared by pectin adsorption from citric phosphate buffer onto gold substrates. These pectin model surfaces were used for subsequent interaction studies with xyloglucan and enzymatic degradation behavior. There is a strong correlation between the degree of esterification (DE) and film resistance to degradation with the high DE being the most susceptible to degradation. The adsorption of two mixed linkage glucans (MLG), barley and lichen MLG, onto regenerated cellulose (RC) surfaces in the absence and presence of other matrix polysaccharides was studied. Viscoelastic properties of the resulting layer were compared as a function of the proprotion of '-(1''3) linkages with lichen MLG forming softer gel-like layers on RC. The lichen MLG layers were further used for enzymatic degradation studies with respect to enzyme concentration, temperature, pH and ionic strength. These studies show that polymer adsorption is a promising strategy to modify material surfaces and provides fundamental understanding of interactions and biodegradation of cell wall polysaccharides at solid/liquid interfaces.
- Adsorption of Blood Proteins onto Polysaccharide SurfacesTan, Xinyi (Virginia Tech, 2016-01-10)In this study, surface plasmon resonance (SPR) and quartz crystal microbalance with dissipation monitoring (QCM-D) were combined to investigate the adsorption behavior of two platelet adhesion-related blood proteins, human serum albumin (HSA) and human serum fibrinogen (HSF), on two polysaccharide materials used for hemodialysis membrane applications: regenerated cellulose and cellulose acetate. The study aims to provide insight into the design of novel hemocompatible polysaccharide materials. Information such as real-time adsorption curves, adsorbed amounts, and water contents of the protein layers were obtained and analyzed. The results suggested 1) monolayer adsorption of HSA on both cellulose and cellulose acetate, possibly with different HSA conformations; 2) a multilayer of HSF or some degree of end-on adsorption on both surfaces. The study of HSA adsorption onto cellulose acetate surfaces with different degrees of substitution indicated that the change in content of acetyl groups may not be the main factor governing the adsorbed HSA amount but may affect the conformation of adsorbed HSA molecules.
- Adsorption of Novel Block Copolymers for Steric Stabilization and Flocculation of Colloidal Particles in Aqueous EnvironmentsKrsmanovic, Jody Lynn (Virginia Tech, 2003-01-15)The adsorption of several homopolymer polypeptides on Al2O3 and SiO2 particles and surfaces was investigated to identify possible anchor and tail blocks for brush-forming block copolypeptides. Poly-L-(glutamic acid) (GLU) and poly-L-(aspartic acid) (ASP) were found to adsorb on positively charged and nearly neutral Al2O3, while the GLU did not adsorb on negatively charged SiO2. Poly-L-proline (PRO) adsorbed only slightly on the alumina, but showed high affinity adsorption on silica. These results are useful in designing a brush forming block copolymer with the GLU acting as the anchor block and the PRO as the tail block. An important finding in this work is that these unstructured polypeptides, or proteins that only have primary and secondary structure, have adsorption behavior that is similar to that of synthetic polymers. The complexation between a random copolymer of two amino acids, glutamic acid and tyrosine, and poly(ethylene oxide) (PEO) was studied using an in-situ adsorption experiment. It was shown that the adsorption of the random copolymer greatly increased the adsorption of PEO. It was found that the conformation of the copolymer on the surface was controlled by the ionic strength, and the conformation of the adsorbed PEO was controlled by the PEO molecular weight. Both of these factors affected the molar complexation ratio between the PEO and the tyrosine repeat units. The adsorption of two novel triblock copolymers, with PEO tails and anionic hydrophobic center blocks, was studied on alumina and silica surfaces. On silica the adsorption was due to the PEO tails, resulting in low adsorbed amounts. The adsorption was much greater on alumina, indicating either brush formation on the surface or the adsorption of micelles, which are present in solution. The effect of adsorbed polymer on the steric stabilization of alumina particles was studied using sedimentation and electrophoretic mobility experiments. These results do not show conclusively that the triblock copolymer adsorption led to particle stabilization. It is possible that better colloid stabilization of the alumina may be realized by changing the triblock composition to get greater extension and higher packing of the PEO tails.
- Adsorption of Xyloglucan onto Cellulose and Cellulase onto Self-assembled MonolayersQian, Chen (Virginia Tech, 2012-04-19)Adsorption of xyloglucan (XG) onto thin desulfated nanocrystalline cellulose (DNC) films was studied by surface plasmon resonance spectroscopy (SPR), quartz crystal microbalance with dissipation monitoring (QCM-D), and atomic force microscopy (AFM) measurements. These studies were compared to adsorption studies of XG onto thin sulfated nanocrystalline cellulose (SNC) films and regenerated cellulose (RC) films performed by others. Collectively, these studies show the accessible surface area is the key factor for the differences in surface concentrations observed for XG adsorbed onto the three cellulose surfaces. XG penetrated into the porous nanocrystalline cellulose films. In contrast, XG was confined to the surfaces of the smooth, non-porous RC films. Surprisingly surface charge and cellulose morphology played a limited role on XG adsorption. The effect of the non-ionic surfactant Tween 80 on the adsorption of cellulase onto alkane thiol self-assembled monolayers (SAMs) on gold was also studied. Methyl (-CH3), hydroxyl (-OH) and carboxyl (-COOH) terminated SAMs were prepared. Adsorption of cellulase onto untreated and Tween 80-treated SAMs were monitored by SPR, QCM-D and AFM. The results indicated cellulase adsorption onto SAM-CH3 and SAM-COOH were driven by strong hydrophobic and electrostatic interactions, however, hydrogen bonding between cellulase and SAM-OH was weak. Tween 80 effectively hindered the adsorption of cellulase onto hydrophobic SAM-CH3 substrates. In contrast, it had almost no effect on the adsorption of cellulase onto SAM-OH and SAM-COOH substrates because of its reversible adsorption on these substrates.
- Adsorption of Xyloglucan onto Thin Films of Cellulose Nanocrystals and Amorphous Cellulose: Film Thickness EffectsKittle, Joshua D.; Qian, Chen; Edgar, Emma; Roman, Maren; Esker, Alan R. (American Chemical Society, 2018-10-01)
- Adsorption Studies of Polysaccharides and Phospholipids Onto CelluloseDu, Xiaosong (Virginia Tech, 2011-12-12)Interactions between biomolecules and cellulose films at solid/liquid interfaces was studied by surface plasmon resonance spectroscopy (SPR), quartz crystal microbalance with dissipation monitoring (QCM-D) and in situ atomic force microscopy (AFM) measurements. This dissertation shows the porous character of nanocrystalline cellulose films as the key feature for enhanced adsorption of chemically modified polysaccharides and provides quantitative analysis of polymer supported phospholipid structures as a stable platform for studying membrane-related processes. Smooth cellulose I films were prepared by spincoating cellulose nanocrystal suspensions onto positively charged self-assembled monolayers on gold. The adsorption of pullulan cinnamate (PC) onto cellulose surfaces increased with increasing degree of cinnamate substitution. The interactions between PCs with higher degree of substitution (DS) and porous nanocrystalline cellulose (NC) films presumably generated looped multilayer PC structures that adsorbed more than twice as much onto NC films than onto regenerated cellulose (RC) films. PC chains not only covered the NC surface but also penetrated into the porous film. The porous features of NC film are responsible for the greater adsorption of polymer chains relative to tightly packed RC films. Adsorption of phospholipid vesicles onto RC and NC films was also studied. Aggregates of intact vesicle were observed on NC surfaces with high water content ~ 84 % by mass. Phospholipid patches with smooth features were found to assemble onto RC surfaces with a lower degree of hydration ~ 30 % by mass. Vesicle membrane breakage was triggered by a destabilizing agent, LysoPC. The great mass decrease, and changes in dissipation and degree of hydration for phospholipid structures after exposure to LysoPC corresponded to the transformation from vesicles to layered structures. Initial binding of LysoPC micelles to unruptured vesicles was clearly resolved in SPR, whereas the huge mass decrease associated with bound water hides the initial adsorption of LysoPC onto vesicles in QCM-D experiments. The intitial binding of LysoPC micelles onto vesicle membranes lasted for 200 seconds with a maximal increase of 14 % by mass prior to vesicle collapse. The role of cholesterol in phospholipid interactions with model cellulose surfaces was also considered. Supported vesicle layers over RC surfaces were observed for vesicle membranes containing ≥ 6.3 % by mole cholesterol, whereas phospholipid or phospholipid with lower cholesterol content formed disconnected lipid islands on RC surfaces. Meanwhile, intact vesicles were always observed on NC surfaces for phospholipid/cholesterol blends regardless of the cholesterol content. The intact vesicles on cellulose surfaces were attributed to the ability of cholesterol to accommodate vesicle deformation. These studies showed the impact of mesoscale structure of cellulose films on adsorbates. It sheds light on the role of the lignin-carbonhydrate-complex in plant cell wall structure and will inform the next generation of biomimetic nanocomposites. The designed polymer supported biomimetic membranes provide a perfect platform to develop intact and ruptured protoplast systems for the study of plant cell wall self-assembly.
- AFM-Assisted Nanofabrication using Self-Assembled MonolayersJang, Chang-Hyun (Virginia Tech, 2003-12-19)This study describes the covalent and the electrostatic attachment of molecules, nano-particles, and proteins to patterned self-assembled monolayers. A scanning probe nanografting technique was employed to produce patterns of various sizes, down to 10 nm. Thus, we are able to demonstrate a degree of surface patterning which is an order of magnitude smaller than that used in the semiconductor industry. One efficient strategy for creating chemically specific nanostructures is to use the extraordinary catalytic properties of enzymes. However, as the dimension of a catalyst patch is reduced down to nanometer scale, it is difficult to detect the very low concentration of product. This study resolves the problem by developing a new strategy: the surface trapping of a product generated by a nanometer-scale patch of surface-bound enzyme. An array of proteins finds use when the array contains a number of different proteins. Toward this end, a new and convenient method for immobilizing enzymes is developed, which will allow the preparation of thin films containing several different catalytically-active enzymes on the nanoscale. The disadvantage of scanning probe nanografting technique is that the AFM tip loses resolution through wear during the patterning procedure. This study examines the possibility of developing a new AFM lithographic method to avoid wear: the use of enzymes covalently attached to a tip as a site-specific catalyst.
- Arabinoglucuronoxylan and Arabinoxylan Adsorption onto Regenerated Cellulose FilmsNi, Ying (Virginia Tech, 2013-09-03)Cellulose and hemicelluloses have attracted increasing interest as renewable biopolymers because of their abundance. Furthermore, the recognition of biomass as a sustainable and renewable source of biofuels has driven research into the assembly and disassembly of polymers within plant cell walls. Cellulose thin films are useful in the study of interactions between cellulose and hemicelluloses, and quartz crystal microbalances with dissipation monitoring (QCM-D), surface plasmon resonance (SPR) and atomic force microscopy (AFM) are widely used to investigate polymer adsorption/desorption at liquid/solid interfaces. In this study, smooth trimethylsilyl cellulose (TMSC) films were spincoated onto gold QCM-D sensors and hydrolyzed into ultrathin cellulose films upon exposure to aqueous HCl vapor. The adsorption of arabinoglucuronoxylan (AGX) and arabinoxylan (AX) onto these cellulose surfaces was studied. The effects of structure, molar mass and ionic strength of the solution were considered. Increasing ionic strength increased AGX and AX adsorption onto cellulose. While AGX showed greater adsorption onto cellulose than AX by QCM-D, the trend was reversed in SPR experiments. The combination of QCM-D and SPR data showed a greater amount of water was trapped within the AX films. Both adsorbed AGX and AX films were subsequently visualized by AFM. Images from AFM showed AGX and AX adsorbed as aggregates from water, while AGX and AX adsorbed from CaCl2 yielded smaller xylan particles with more numerous globular structures on the cellulose surfaces. Images from AFM of xylan films on bare gold surfaces also showed layers of uniform aggregates that were consistent with AX and AGX aggregation in solution.
- ATR-FTIR Measurements of Cationic Surfactant Exchange Rates at the Solid-Liquid InterfaceClark, Spencer C. (Virginia Tech, 2003-05-01)In many experiments, surfactant adsorption and desorption at solid-liquid interfaces is found to be quite slow, considering that surfactants are small molecules. Attenuated total reflectance Fourier transform infrared spectroscopy was used to study the adsorption, desorption, and exchange of tetradecyltrimethylammonium bromide (C14TABr) at the silicon oxide surface. The exchange of surfactant was monitored using protonated and perdeuterated C14TABr. The data show that exchange of C14TABr between the surface and the bulk solution is very fast, complete exchange occurs in less than 10 seconds. A simple exchange model suggests that the disassociation rate constant of a single monomer is no less than 1 s-1, which is ~ 104 times slower than monomer exchange in bulk solutions. The actual exchange rate may be greater than observed in the present work due to transport phenomena. The rates of exchange are similar at concentrations above and below the critical micellar concentration. Adsorption is similarly rapid, but under some circumstances there is a small residue of surfactant that is slow to desorb. Desorption experiments utilizing KBr solutions of high and low ionic strength show that two thirds of each adsorbed micelle is held by hydrophobic association, and the other third is electrostatically bound. Adsorption, desorption, and exchange experiments at temperatures of 11°C above and 8°C below the Krafft temperature (14.4°C) show similar kinetics.
- Binding Interactions of Keratin-Based Hair Fiber Extract to Gold, Keratin, and BMP-2de Guzman, Roche C.; Tsuda, Shanel M.; Ton, Minh-Thi N.; Zhang, Xiao; Esker, Alan R.; Van Dyke, Mark E. (PLOS, 2015-08-28)Hair-derived keratin biomaterials composed mostly of reduced keratin proteins (kerateines) have demonstrated their utility as carriers of biologics and drugs for tissue engineering. Electrostatic forces between negatively-charged keratins and biologic macromolecules allow for effective drug retention; attraction to positively-charged growth factors like bone morphogenetic protein 2 (BMP-2) has been used as a strategy for osteoinduction. In this study, the intermolecular surface and bulk interaction properties of kerateines were investigated. Thiol-rich kerateines were chemisorbed onto gold substrates to form an irreversible 2-nm rigid layer for surface plasmon resonance analysis. Kerateine-to-kerateine cohesion was observed in pH-neutral water with an equilibrium dissociation constant (KD) of 1.8 × 10⁻⁴ M, indicating that non-coulombic attractive forces (i.e. hydrophobic and van der Waals) were at work. The association of BMP-2 to kerateine was found to be greater (KD = 1.1 × 10−7 M), within the range of specific binding. Addition of salts (phosphate-buffered saline; PBS) shortened the Debye length or the electrostatic field influence which weakened the kerateine-BMP-2 binding (KD = 3.2 × 10⁻⁵ M). BMP-2 in bulk kerateine gels provided a limited release in PBS (~ 10% dissociation in 4 weeks), suggesting that electrostatic intermolecular attraction was significant to retain BMP-2 within the keratin matrix. Complete dissociation between kerateine and BMP-2 occurred when the PBS pH was lowered (to 4.5), below the keratin isoelectric point of 5.3. This phenomenon can be attributed to the protonation of keratin at a lower pH, leading to positive-positive repulsion. Therefore, the dynamics of kerateine-BMP-2 binding is highly dependent on pH and salt concentration, as well as on BMP-2 solubility at different pH and molarity. The study findings may contribute to our understanding of the release kinetics of drugs from keratin biomaterials and allow for the development of better, more clinically relevant BMP-2-conjugated systems for bone repair and regeneration..
- Bio-inspired Cellulose NanocompositesPillai, Karthik (Virginia Tech, 2011-04-26)Natural composites like wood are scale-integrated structures that range from molecular to the macroscopic scale. Inspired by this design, layer-by-layer (LbL) deposition technique was used to create lignocellulosic composites from isolated wood polymers namely cellulose and lignin, with a lamellar architecture. In the first phase of the study, adsorption of alkali lignin onto cationic surfaces was investigated using a quartz crystal microbalance with dissipation monitoring (QCM-D). Complete coverage of the cationic surface with alkali lignin occured at low solution concentration; large affinity coefficients were calculated for this system at differing pH levels. Adsorption studies with organosolv lignin in an organic solvent, and spectroscopic analysis of mixtures of cationic polymer with alkali lignin revealed a non-covalent interaction. The work demonstrated how noncovalent interactions could be exploited to molecular organize thin polyphenolic biopolymers on cationic surfaces. The second phase of the study examined the adsorption steps during the LbL assembly process to create novel lignocellulosic composites. LbL assembly was carried out using oxidized nanocellulose (NC) and lignin, along with a cationic polymer poly(diallyldimethylammonium chloride) (PDDA). QCM-D was used to follow the sequential adsorption process of the three different polymers. Two viscoelastic models, namely Johannsmann and Voigt, were respectively used to calculate the areal mass and thickness of the adsorbed layers. Atomic force microscopy studies showed a complete coverage of the surface with lignin in all the disposition cycles, however, surface coverage with NC was seen to increase with the number of layers. Free-standing composite films were obtained when the LbL process was carried out for 250 deposition cycles (500 bilayers) on a cellulose acetate substrate, following the dissolution of the substrate in acetone. Scanning electron microscopy of the cryo-fractured cross-sections showed a lamellar structure, and the thickness per adsorption cycle was estimated to be 17 nm. The third phase of the study investigated the effect of LbL ordering of the polymers versus a cast film composed of a blended mixture of the polymers, using dynamic mechanical analysis. A tan ï ¤ peak was observed in the 30 – 40 ºC region for both films, which was observed in the neat NC film. Heating of the samples under a compressive force produced opposite effects in the films, as the LbL films exhibited swelling, whereas the cast films showed densification. The apparent activation energy of this transition (65 – 80 kJ mol-1) in cast films, calculated based on the Arrhenius equation was found to be coincident to those reported for the ï ¢ transition of amorphous cellulose. The peak was seen to disappear in case of LbL films in the second heat, whereas it was recurring in case of cast films of the blended mixture, and neat NC films. Altogether, the together the work details a novel path to integrate an organized lignin and cellulose molecular structure, albeit modified from their native form, into a three-dimensional composite material.
- Bioenabled Synthesis of Anisotropic Gold and Silver NanoparticlesGeng, Xi (Virginia Tech, 2017-06-16)Anisotropic plasmonic noble metallic nanoparticles (APMNs) have received enormous attention due to their distinct geometric features and fascinating physicochemical properties. Owing in large part to their tailored localized surface plasmon resonance (LSPR) and the intensive electromagnetic field at the sharp corners and edges, APMNs are exceptionally well suited for biomedical applications such as biosensing, bioimaging, diagnostics and therapeutics. Although a rich variety of surfactant-assisted colloidal routes have been developed to prepare well-defined APMNs, biomedical applications necessitate tedious and rigorous purification processes for the complete removal of toxic surfactants. In this dissertation, we aim to develop generic bioenabled green synthetic methodologies towards APMNs. By applying a series of thermodynamic, kinetic and seed quality control, a series of APMNs with varied morphologies such as branched nanostars and triangular nanoprisms have been successfully prepared. We first presented the preparation of gold nanostars (Au NSTs) through a two-step approach utilizing a common Good's buffer, HEPES, as a weak reducing agent. Single crystalline Au NSTs with tunable branches up to 30 nm in length were produced and the halide ions rather than the ionic strength played a significant roles on the length of the branches of Au NSTs. Then consensus sequence tetratricopetide repeat (CTPR) proteins with increasing number of repeats were used as model proteins to probe the effects of concentration as well as the protein shape on the morphology and resulting physicochemical properties of plasmonic gold nanoparticles. Since the underlying growth mechanism for the biomimetic synthesis of APMNs remains elusive and controversial, the other objective is to elucidate the molecular interactions between inorganic species and biopolymers during the course of NP evolution. Fluorescent quenching and 2D NMR experiments have confirmed the moderate binding affinity of CTPR to the Au(0) and Au(III). We observed that the initial complexation step between gold ions and CTPR3 is ionic strength dependent. Furthermore, we also found that NPs preferentially interact with the negatively charged face of CTPR3 as observed in 2D NMR. Knowledge of binding behavior between biospecies and metal ions/NPs will facilitate rational deign of proteins for biomimetic synthesis of metallic NPs. A modified seed-mediated synthetic strategy was also developed for the growth of silver nanoprisms with low shape polydispersity, narrow size distribution and tailored plasmonic absorbance. During the seed nucleation step, CTPR proteins are utilized as potent stabilizers to facilitate the formation of planar-twinned Ag seeds. Ag nanoprisms were produced in high yield in a growth solution containing ascorbic acid and CTPR-stabilized Ag seeds. From the time-course UV-Vis and transmission electron microscopy (TEM) studies, we postulate that the growth mechanism is the combination of facet selective lateral growth and thermodynamically driven Ostwald ripening. By incorporation of seeded growth and biomimetic synthesis, gold nanotriangles (Au NTs) with tunable edge length were synthesized via a green chemical route in the presence of the designed CTPR protein, halide anions (Br⁻) and CTPR-stabilized Ag seeds. The well-defined morphologies, tailored plasmonic absorbance from visible-light to the near infrared (NIR) region, colloidal stability and biocompatibility are attributed to the synergistic action of CTPR, halide ions, and CTPR-stabilized Ag seeds. We also ascertained that a vast array of biosustainable materials including negatively charged lignin and cellulose derivatives can serve as both a potent stabilizers and an efficient nanocrystal modifiers to regulate the growth of well-defined Ag nanoprisms using a one-pot or seeded growth strategy. The influential effects of reactants and additives including the concentration of sodium lignosulfonate, H2O2 and NaBH4 were studied in great detail. It implies that appropriate physicochemical properties rather than the specific binding sequence of biomaterials are critical for the shaped-controlled growth of Ag NTs and new synthetic paradigms could be proposed based on these findings. Last but not the least, we have demonstrated the resulting APMNs, particularly, Au NSTs and Ag NTs exhibit remarkable colloidal stability, enhanced SERS performance, making them promising materials for biosensing and photothermal therapy. Since the Ag nanoprisms are susceptible to morphological deformation in the presence of strong oxidant, they also hold great potential for the colorimetric sensing of oxidative metal cation species such as Fe3+, Cr3+, etc.
- Biopolymer Structure Analysis and Saccharification of Glycerol Thermal Processed BiomassZhang, Wei (Virginia Tech, 2015-01-31)Glycerol thermal processing (GTP) is studied as a novel biomass pretreatment method in this research with the purposes to facilitate biopolymer fractionation and biomass saccharification. This approach is performed by treating sweet gum particles on polymer processing equipment at high temperatures and short times in the presence of anhydrous glycerol. Nine severity conditions are studied to assess the impact of time and temperature during the processing on biopolymer structure and conversion. The GTP pretreatment results in the disruption of cell wall networks by increasing the removal of side-chain sugars and lignin-carbohydrate linkages based on severity conditions. After pretreatment, 41% of the lignin and 68% of the xylan is recovered in a dry powdered form by subsequent extractions without additional catalysts, leaving a relatively pure cellulose fraction, 84% glucan, as found in chemical pulps. Lignin structural analysis indicated GTP processing resulted in extensive degradation of B-aryl ether bonds through the C-y elimination, followed by abundant phenolic hydroxyl liberation. At the same time, condensation occurred in the GTP lignin, providing relatively high molecular weight, near to that of the enzymatic mild acidolysis lignin. Better thermal stability was observed for this GTP lignin. In addition to lignin, xylan was successfully isolated as another polymer stream after GTP pretreatment. The recovered water insoluble xylan (WIX) was predominant alkali soluble fraction with a maximum purity of 84% and comparable molecular weight to xylan isolated from non-pretreated fibers. Additionally, the narrow molecular weight distribution of recovered WIX, was arisen from the pre-extraction of low molecular weight water-soluble xylan. Additionally, a 20-fold increase of the ultimate enzymatic saccharification for GTP pretreated biomass was observed even with significant amounts of lignin and xylan remaining on the non-extracted fiber. The shear and heat processing caused a disintegrated cell wall structure with formation of biomass debris and release of cellulose fibrils, enhancing surface area and most likely porosity. These structural changes were responsible for the improved biomass digestibility. Additionally, no significant inhibitory compounds for saccharification are produced during GTP processing, even at high temperatures. While lignin extraction did not promote improvement in hydrolysis rates, further xylan extraction greatly increases the initial enzymatic hydrolysis rate and final level of saccharification. The serial of studies fully demonstrate glycerol thermal processing as a novel pretreatment method to enhance biomass saccharification for biofuel production, as well as facilitate biopolymer fractionation. Moreover, the study shows the impact of thermally introduced structural changes to wood biopolymers when heated in anhydrous environments in the presence of hydrogen bonding solvent.
- Block Copolymer Derived Porous Carbon Fiber for Energy and Environmental ScienceSerrano, Joel Marcos (Virginia Tech, 2022-04-26)As the world population grows, a persistent pressure on natural resources remains. Resource requirements have extensively expanded due to industrialization. Several technological advancements continually aim to alleviate these resource shortages by targeting existing shortcomings in effective and efficient material design. Practical, high-performing, and economical materials are needed in several key application areas, including energy storage, energy harvesting, electronics, catalysis, and water purification. Further development into high-performing and economical materials remain imperative. Innovators must seek to develop technologies that overcome fundamental limitations by designing materials and devices which address resource challenges. Carbon serves as a versatile material for a wide range of applications including purification, separation, and energy storage owing to excellent electrical, physical, and mechanical properties. One-dimensional (1D) carbon fiber in particular is renowned for excellent strength with high surface-to-volume ratio and is widely commercially available. Although an exceptional candidate to address current energy and environmental needs, carbon fibers require further investigation to be used to their full potential. Emerging strategies for carbon fiber design rely on developing facile synthetic routes for controlled carbon structures. The scientific community has shown extensive interest in porous carbon fabrication owing to the excellent performance enhancement in separation, filtration, energy storage, energy conversion, and several other applications. This dissertation both reviews and contributes to the recent works of porous carbon and their applications in energy and environmental sciences. The background section shows recent development in porous carbon and the processing methods under investigation and current synthetic methods for designing porous carbon fibers (PCF). Later sections focus on original research. A controlled radical polymerization method, reversible addition-fragmentation chain transfer (RAFT), enabled a synthetic design for a block copolymer precursor, poly(methyl methacrylate) (PMMA) and polyacrylonitrile (PAN). The block copolymer (PMMA-b-PAN) possesses a unique microphase separation when electrospun and develop narrowly disperse mesopores upon carbonization. The PMMA and PAN domains self-assemble in a kinetically trapped disordered network whereby PMMA decomposes and PAN cross-links into PCF. The initial investigation highlights the block copolymer molecular weight and compositional design control for tuning the physical and electrochemical properties of PCF. Based on this study, mesopore (2 – 50 nm) size can be tuned between 10 – 25 nm while maintaining large surface areas, and the PAN-derived micropores (< 2 nm). The mesopores and micropores both contribute to the development of the unique hierarchical porous carbon structure which brings unprecedented architectural control. The pore control greatly contributes to the carbon field as the nano-scale architecture significantly influences performance and functionality. The next section uses PCF to clean water sources that are often tainted with undesirable ions such as salts and pollutants. Deionization or electrosorption is an electrochemical method for water purification via ion removal. I employed the PCFs as an electrode for deionization because of their high surface area and tunable pore size. Important for deionization, the adsorption isotherms and kinetics highlight the capacity and speed for purification of water. I studied PCF capacitive filtration on charged organic salts. Because PCF have both micropores and mesopores, they were able to adsorb ions at masses exceeding their own weight. The PFC adsorption efficiency was attributed to the diffusion kinetics within the hierarchical porous system and the double layer capacitance development on the PCF surface. In addition, based on the mechanism of adsorption, the PCFs showed high stability and reusability for future adsorption/desorption applications. The PCF performance as an electrosorption material highlights the rational design for efficient electrodes by hierarchical interconnected porosity. Another application of PFCs is updating evaporative desalination methods for water purification. Currently distillation is not widely used as a source of potable water owing to the high cost and energy requirement. Solar desalination could serve as a low-cost method for desalination; however, the evaporation enthalpy of water severely limits practical implementation. Here I apply the pore design of PCF as a method for water nano-confinement. Confinement effects reduce water density and lowers evaporation enthalpy. Desalination in PCF were studied in pores < 2 nm to 22 nm. The PCF pore size of ~ 10 nm was found to be the peak efficiency and resulted in a ~ 46% reduction in enthalpy. Interestingly, the PCF nano-confinement also contributed to the understanding in competing desorption energy for evaporation in micropores. The pore design in PCF also shows confinement effects that can be implemented in other environmental applications. Lastly, the block copolymer microphase morphology was explored in a vapor induced phase separation system. The resulting PCF properties showed a direct influence from the phase separation caused by nonsolvent. At low nonsolvent vapor, a disordered microphase separation occurred, however upon application of nonsolvent vapor, the polymer chains reorganized. The reorganization initially improved mechanical properties by developing more long-range ordered graphic chains in the PAN-derived carbon. However, at higher nonsolvent vapor concentrations, the fibers experienced polymer precipitation which resulted in bead and clump formation in the fiber mats. The beads and clumps lowered both mechanical properties and electrochemical performance. The vapor induced phase separation showed a method for enhancing mechanical properties without compromising electrochemical performance in flexible carbon fibers.
- Block Copolymer Solutions: Transport and Dynamics, Targeted Cargo Delivery, and Molecular Partitioning and ExchangeLi, Xiuli (Virginia Tech, 2020-01-23)Block copolymers have been extensively applied in diverse fields including packaging, electrolytes, delivery devices, and biosensors. Multiple investigations have been carried out on polymeric materials for cargo delivery purpose to understand how they behave over time. Block copolymer micelles (BCMs) have demonstrated superiority to deliver cargo, especially in drug delivery due to their encapsulation of hydrophobic agents. This dissertation will mainly study BCMs for potential applications in cargo delivery. Methods to study BCMs, including NMR spectroscopy, relaxometry and diffusometry, can provide valuable molecular information, such as chemical structure, translational motion, inter- or intramolecular interaction, dynamics, and exchange kinetics. Therefore, this dissertation describes applications of versatile NMR methods to reveal the fundamental behaviors of block copolymer self-assemblies, such as their dynamic stability, cargo partitioning, polymer chain exchange, and chain distribution in solution. We have investigated two BCM systems. Poly(ethylene oxide)-b-(ε-caprolactone) (PEO-PCL) is a model system to study BCM dynamic stability. PEO-PCL can self-assemble into spherical micelles at 1% w/v in D2O-THF-d8 mixed solvents. We used NMR diffusometry to quantify diffusion coefficients and populations of micelles and unimers (i.e. free polymer chains in solution) over a range of temperature (21 – 50 °C) and solvent composition (10 – 100 vol % THF-d8). By mapping the micelle-unimer coexistence phase diagrams, we are able to enhance our ability to understand and design micelle structure and dynamics. Moreover, we can also probe the chain exchange kinetics between micelles using a new technique we developed – time-resolved NMR spin-lattice relaxation (T1) or TR-NMR. This technique is an analog to time-resolved small-angle neutron scattering (TR-SANS), which can monitor specific signal intensity changes caused after mixing of isotope-labeled micelle solutions. A second system, Pluronic® F127 (PEO99PPO69PEO99) is a test system to study BCM structure and dynamic changes upon drug uptake. Pluronic® F127 is a commercial copolymer that can solubilize different hydrophobic drugs in micelles. We successfully encapsulated three model drugs into Pluronic® F127 BCMs and investigated the effects of polymer concentration and drug composition on drug partitioning fractions. Also, we proposed to design and synthesize a series of block copolymers with varied glass transition temperatures in core-forming blocks. Using NMR diffusometry, we have measured the existing unimer concentrations in micellar solutions and correlated these results with chain mobility and internal chemical composition. Lastly, we have extended our expertise in NMR and polymers into the study of ion-containing polymer systems (polyelectrolytes). A critical problem in polymer science is the inability to reliably measure the molecular weight of polyelectrolytes. We are developing methods to solve this problem by using NMR diffusometry, rheology, scattering, and scaling theories to accomplish general molecular weight measurements for polyelectrolytes. In short, this dissertation describes studies to provide more perspectives on structural and dynamic properties at various time and length scales for polymeric materials. NMR measurements, in combination with many other advanced techniques, have given us a better picture of soft matter behaviors and provided guidance for synthesis and processing efforts, especially in block copolymer micelles for delivery purposes.
- Bulk and interfacial interactions between hydroxypropyl-cellulose and bile salts: Impact on the digestion of emulsified lipidsZornjak, Jennifer; Liu, Jianzhao; Esker, Alan R.; Lin, Tiantian; Fernández-Fraguas, Cristina (2020-09)Hydroxypropyl-cellulose (HPC) is a surface-active, non-digestible polysaccharide, commonly used in food emulsions as thickener and/or emulsifier. Due to these dual characteristics, HPC is a potential ingredient to modulate lipid digestion. Since bile salts (BS) are key players during lipid digestion, the aim of this work was to investigate the impact that interactions of HPC with BS has on the digestion of emulsified lipids. We studied the effect of two BS species differing in bile-acid moiety, sodium-taurocholate (NaTC) and sodium-taurodeoxycholate (NaTDC). A Quartz-Crystal-Microbalance (QCM-D) was used to evaluate HPC-BS interfacial interactions during the sequential and simultaneous adsorption of both components at a hydrophobic surface, while microDifferential-Scanning-Calorimetry was used to examine bulk interactions. In vitro lipid digestion was studied by using a pH-stat method. Results showed that, under fed-state conditions, NaTDC micelles were more effective at displacing a pre-adsorbed HPC layer from the surface than NaTC monomers. Nevertheless, HPC was resistant to complete displacement by both BS. Additionally, HPC was more susceptible to interact with NaTDC in the bulk, compared to NaTC, which made the adsorption more competitive for NaTDC. The reduced amount of free NaTDC in solution could explain the delayed lipolysis shown by HPC-stabilized emulsions when NaTDC was used to simulate duodenal conditions. These findings show that the delay of lipid digestion by HPC is due to the combined effect of HPC-BS interfacial and bulk interactions, with BS-binding in solution mostly contributing to this effect, and the BS molecular and micellar structure playing essential roles on both situations.
- CELL 256: Role of dispersion and polar interactions in the adsorption of cellulases onto ligninRoman, Maren; Jiang, Feng; Chen, Qian; Esker, Alan R. (2018-03)Residual lignin in pretreated biomass hinders its enzymatic hydrolysis. Nonionic surfactants are known to have beneficial effects on the enzymatic hydrolysis of lignocellulosic biomass but their mechanisms of action at the molecular level are incompletely understood. This study investigates the effect of a nonionic surfactant, Tween 80, on the adsorption of cellulases onto model lignin substrates. Lignin substrates were prepared by spin coating of flat substrates with three different types of lignin: organosolv lignin, kraft lignin, and milled wood lignin. Tween 80 and cellulase adsorption onto the lignin substrates was analyzed with a quartz crystal microbalance with dissipation monitoring. Supporting experiments of Tween 80 and cellulase adsorption onto self-assembled monolayers with lignin-related functional groups provided critical insights into the role of polar and dispersive functional groups in lignin on cellulase adsorption and the effect of Tween 80 on the process.
- Cellulose Nanocrystals: Size Characterization and Controlled Deposition by Inkjet PrintingNavarro, Fernando (Virginia Tech, 2010-06-29)Inkjet printing has generated considerable interest as a technique for the patterning of functional materials in the liquid phase onto a substrate. Despite its high promise, the phenomena associated with inkjet printing remain incompletely understood. This research project investigates inkjet printing of cellulose nanocrystals (CNCs) as a possible method for the fabrication of cellulose micropatterns. CNCs were prepared from wood pulp by H₂SO₄ hydrolysis and characterized in terms of length, width, and thickness distributions by atomic force microscopy (AFM) and dynamic light scattering. Aqueous CNC suspensions were characterized in terms of shear viscosity with a rheometer. Glass substrates were cleaned with a detergent solution, aqua regia, or a solvent mixture, and characterized in terms of surface chemical composition, surface free energy, polarity, roughness, ζ-potential, and surface charge distribution in air by X-ray photoelectron spectroscopy, contact angle measurements, AFM, streaming potential, and scanning Kelvin probe microscopy (SKPM). Additionally, poly(ethylene glycol)-grafted glass substrates were prepared and characterized in terms of surface free energy, polarity, and roughness. Aqueous CNC suspensions were printed in different patterns onto the different glass substrates with a commercial, piezoelectric drop-on-demand inkjet printer. Inkjet deposited droplet residues and micropatterns were analyzed by AFM, scanning electron microscopy, and polarized-light microscopy. At low CNC concentrations (0.05 wt %), inkjet-deposited droplets formed ring-like residues due to the "coffee drop effect". The "coffee drop effect" could be suppressed by the use of higher CNC concentrations. The resulting dot-like droplet residues exhibited Maltese cross interference patterns between crossed polarizers, indicating a radial orientation of the birefringent, elongated CNCs in these residues. The observed Maltese cross interference patterns represent unprecedented indirect evidence for a center-to-edge radial flow in drying droplets. The degree of definition of the micropatterns depended strongly on the surface properties of the glass substrates. Well-defined micropatterns were obtained on aqua regia-cleaned substrates. In addition to the surface free energy and polarity, other factors seemed to play a role in the formation of the inkjet-printed micropatterns. If these factors can be identified and controlled, inkjet deposition of CNCs could become an attractive method for the fabrication of cellulose micropatterns.
- Characterization of Cellulose and Chitin Thin Films and Their Interactions with Bio-based PolymersKittle, Joshua Daniel (Virginia Tech, 2012-04-02)As the two most abundant natural polymers on earth, cellulose and chitin have attracted increasing attention as a source of renewable energy and functional materials. Thin films of cellulose and chitin are useful for studying interactions of these materials with other natural and synthetic molecules via techniques such as quartz crystal microbalance with dissipation monitoring (QCM-D) and surface plasmon resonance (SPR). Because of the difficulty of extracting native cellulose, regenerated cellulose (RC), sulfated nanocrystalline cellulose (SNC), and desulfated nanocrystalline cellulose (DNC) thin films are often studied in its place. In this work, QCM-D solvent exchange studies showed that water contents of RC, SNC and DNC films were proportional to the film thickness (d). Accessibility and degradation of the films was further analyzed via substrate exposure to cellulase. Cellulase adsorption onto RC films was independent of d, whereas cellulase adsorption onto SNC and DNC films increased with d. Enhanced access to guest molecules for SNC and DNC films relative to RC films revealed they are more porous. The porosity of these cellulose films aided in understanding the observed differences of xyloglucan (XG) adsorption onto their surfaces. Xyloglucan adsorption onto RC, SNC, and DNC was studied by QCM-D and SPR. The amount of adsorbed XG increased in the order RC < SNC < DNC. XG adsorption onto RC films was independent of d, whereas XG adsorption was weakly dependent upon d for SNC films and strongly dependent upon d for DNC films. However, XG adsorbed onto "monolayer" thin films of RC, SNC, and DNC in approximately the same amount. These results suggested that the morphology and surface charge of the cellulose substrate had a limited effect upon XG adsorption and that accessible surface area of the cellulose film may be the factor leading to apparent differences in XG adsorption for different surfaces. The porosity and surface charge of SNC films presented a unique opportunity to examine polyelectrolyte adsorption and subsequent dewatering of the SNC substrate. The adsorption of a series of cationically derivatized dextran (cDex) polyelectrolytes with various degrees of substitution (DS) onto SNC was studied using QCM-D and SPR. As the hydrophobic character of the cDex samples increased, the water content of the adsorbed cDex layer decreased. For cDex with the greatest hydrophobic content, nearly 50% by mass of the initial water present in the porous SNC film was removed upon cDex adsorption. This study indicated that the water content of the film could be tailored by controlling the DS and hydrophobic character of the polyelectrolyte. This work also presents the first report of smooth, homogeneous, ultrathin chitin films, opening the door to surface studies of binding interactions, adsorption kinetics, and enzymatic degradation. The chitin films were formed by spincoating trimethylsilyl chitin onto gold or silica substrates, followed by regeneration to a chitin film. The utility of these chitin films as biosensors was evident from QCM-D and SPR studies that revealed bovine serum albumin adsorbed as a monolayer.
- Characterization of Intermolecular Interactions in Nanostructured MaterialsHudson, Amanda Gayle (Virginia Tech, 2015-12-01)Advanced analytical techniques were utilized to investigate the intermolecular forces in several nanostructured materials. Techniques including, but not limited to, isothermal titration calorimetry (ITC), variable temperature Fourier transform infrared (FTIR) spectroscopy, and ultraviolet-visible (UV-Vis) thermal curves were used to study the fundamental interactions present in various nanomaterials, and to further probe the influence of these interactions on the overall behavior of the material. The areas of focus included self-assembly of surfactant micelles, polycation complexation of DNA, and temperature-dependent hydrogen bonding in polymeric systems. ITC was successfully used to determine the low critical micelle concentration (CMC) for a novel gemini surfactant with limited water solubility. CMCs were measured at decreasing methanol molar fractions (xMeOH) in water and the resulting linear relationship between CMC and methanol concentration was used to mathematically extrapolate to a predicted CMC at xMeOH = 0. Using this technique, the CMC value for the novel gemini surfactant was predicted to be 0.037 ± 0.004 mM. This extrapolation technique was also validated with surfactant standards. ITC was also used to investigate the binding thermodynamics of polyplex formation with polycations and DNA. The imidazolium-containing and trehalose-based polycations were both found to have endothermic, entropically driven binding with DNA, while the adenine-containing polycation exhibited exothermic DNA binding. In addition, ITC was also used to confirm the stoichiometric binding ratio of linear polyethylenimine and DNA polyplexes as determined by a novel NMR method. Dynamic light scattering (DLS) and zeta potential measurements were also performed to determine the size and surface charge of polyplexes. Circular dichroism (CD) and FTIR spectroscopies provided information regarding the structural changes that may occur in the DNA upon complexation with polymers. UV-Vis thermal curves indicated that polyplexes exhibit a greater thermal stability than DNA by itself. Variable temperature FTIR spectroscopy was used to quantitatively compare the hydrogen bonding behavior of multi-walled carbon nanotube (MWCNT)-polyurethane composites. Spectra were collected from 35 to 185 deg C for samples containing various weight percent loadings of MWCNTs with different hydrogen bonding surface functionalities. Peak fitting analysis was performed in the carbonyl-stretching region for each sample, and the hydrogen-bonding index (Rindex) was reported. Rindex values were used to quantitatively compare all of the composite samples in regards to temperature effects, weight percent loadings of MWCNTs, and the different functionalizations. In general, higher weight percent loadings of the MWCNTs resulted in greater Rindex values and increased hydrogen bond dissociation temperatures. In addition, at 5 and 10 wt% loadings the initial Rindex values displayed a trend that tracked well with the increasing hydrogen bonding capacity of the various surface functionalities.