Browsing by Author "Ge, Mingming"

Now showing 1 - 4 of 4
  • Thumbnail Image
    Experimental Study of Pressure and Velocity Fluctuations Induced by Cavitation in a Small Venturi Channel
    Zhang, Linrong; Zhang, Guangjian; Ge, Mingming; Coutier-Delgosha, Olivier (MDPI, 2020-12-08)
    The purpose of this paper is to investigate experimentally the influence of the cavitation extent on the pressure and velocity fluctuations in a small convergent–divergent channel. The mean cavity length is determined from high-speed photography images. The mean pressure and the intensity of the pressure fluctuations are obtained from the transient pressure signals recorded by two pressure transducers at the inlet and outlet of the test section. The statistical turbulence quantities are derived from the instantaneous velocity fields measured by the laser-induced fluorescent particle image velocimetry (PIV-LIF) technique. The experimental results show that the decrease of the cavitation number (the increase in the extent of cavitation) leads to a rise in the turbulent fluctuations in the wake region due to the impact of vapour clouds collapsing, while the presence of a vapour phase is found to reduce the streamwise and cross-stream velocity fluctuations in the attached cavity. It might be attributed to two mechanisms: the presence of a vapour phase modifies the vortex-stretching process, and the cavitation compressibility damps out the turbulent fluctuations. Similar effects of cavitation are also observed in the pressure fluctuations.
  • Thumbnail Image
    Experimental Study of Two-Phase Cavitating Flows and Data Analysis
    Ge, Mingming (Virginia Tech, 2022-05-25)
    Cavitation can be defined as the breakdown of a liquid (either static or in motion) medium under very low pressure. The hydrodynamic happened in high-speed flow, where local pressure in liquid falls under the saturating pressure thus the liquid vaporizes to form the cavity. During the evolution and collapsing of cavitation bubbles, extreme physical conditions like high-temperature, high-pressure, shock-wave, and high-speed micro-jets can be generated. Such a phenomenon shall be prevented in hydraulic or astronautical machinery due to the induced erosion and noise, while it can be utilized to intensify some treatment processes of chemical, food, and pharmaceutical industries, to shorten sterilization times and lower energy consumption. Advances in the understanding of the physical processes of cavitating flows are challenging, mainly due to the lack of quantitative experimental data on the two-phase structures and dynamics inside the opaque cavitation areas. This dissertation is aimed at finding out the physical mechanisms governing the cavitation instabilities and making contributions in controlling hydraulic cavitation for engineering applications. In this thesis, cavitation developed in various convergent-divergent (Venturi) channels was studied experimentally using the ultra-fast synchrotron X-ray imaging, LIF Particle Image Velocimetry, and high-speed photography techniques, to (1) investigate the internal structures and evolution of bubble dynamics in cavitating flows, with velocity information obtained for two phases; (2) measure the slip velocity between the liquid and the vapor to provide the validation data for the numerical cavitation models; (3) consider the thermodynamic effects of cavitation to establish the relation between the cavitation extent and the fluid temperature, then and optimize the cavitation working condition in water; (4) seek the coherent structures of the complicated high-turbulent cavitating flow to reduce its randomness using data-driven methods.
  • Thumbnail Image
    Numerical Investigation of Cavitating Jet Flow Field with Different Turbulence Models
    Li, Lidong; Xu, Yan; Ge, Mingming; Wang, Zunce; Li, Sen; Zhang, Jinglong (MDPI, 2023-09-19)
    In numerous industries such as drilling, peening, cleaning, etc., a cavitating jet is adopted. However, it is challenging to simulate the cavitating flow field numerically with accuracy. The flow field of the organ pipe cavitation nozzle is simulated in this research using the RNG k−ε, DES, and LES turbulence models. The LES model can more accurately predict the periodic shedding of a cavitating cloud, which is basically consistent with the jet morphology captured with a high−speed camera. The flow pattern, cavitating cloud evolution and shedding period of a cavitating jet are analyzed. The findings demonstrate that the LES model produces a cavitating effect inside the nozzle that is superior to those produced by the RNG k−ε and DES models. The vortex rings in the diffusion section are simulated using the LES model, which accelerates cavitation. The cavitating clouds of the organ pipe nozzle show periodic evolutions, with stages of generation, development, shedding and collapse. The periodic shedding of the cavitating clouds exhibits a similar pattern in the vorticities simulated using the LES model, and the vorticities display the small-scale structures where the cavitating bubbles collapse. This study can provide a reference for the simulation of a cavitating jet and the analysis of the cavitating mechanism.
  • Thumbnail Image
    Review of the Research Status of Cost-Effective Zinc-Iron Redox Flow Batteries
    Zhang, Huan; Sun, Chuanyu; Ge, Mingming (MDPI, 2022-10-31)
    Zinc–iron redox flow batteries (ZIRFBs) possess intrinsic safety and stability and have been the research focus of electrochemical energy storage technology due to their low electrolyte cost. This review introduces the characteristics of ZIRFBs which can be operated within a wide pH range, including the acidic ZIRFB taking advantage of Fen+ with high solubility, the alkaline ZIRFB operating at a relatively high open-circuit potential and current densities, and the neutral ZIRFB providing a non-toxic, harmless, and mild environment. No matter what kind of ZIRFB, there are always zinc dendrites limiting areal capacity on the anode, which has become an obstacle that must be considered in zinc-based RFBs. Therefore, we focus on the current research progress, especially the summarizing and analysis of zinc dendrites, Fe(III) hydrolysis, and electrolytes. Given these challenges, this review reports the optimization of the electrolyte, electrode, membrane/separator, battery structure, and numerical simulations, aiming to promote the performance and development of ZIRFBs as a practical application technology. Based on these investigations, we also provide the prospects and development direction of ZIRFBs.