Browsing by Author "Grisso, Benjamin Luke"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Advancing Autonomous Structural Health Monitoring
    Grisso, Benjamin Luke (Virginia Tech, 2007-11-27)
    The focus of this dissertation is aimed at advancing autonomous structural health monitoring. All the research is based on developing the impedance method for monitoring structural health. The impedance technique utilizes piezoelectric patches to interrogate structures of interested with high frequency excitations. These patches are bonded directly to the structure, so information about the health of the structure can be seen in the electrical impedance of the piezoelectric patch. However, traditional impedance techniques require the use of a bulky and expensive impedance analyzer. Research presented here describes efforts to miniaturize the hardware necessary for damage detection. A prototype impedance-based structural health monitoring system, incorporating wireless based communications, is fabricated and validated with experimental testing. The first steps towards a completely autonomous structural health monitoring sensor are also presented. Power harvesting from ambient energy allows a prototype to be operable from a rechargeable power source. Aerospace vehicles are equipped with thermal protection systems to isolate internal components from harsh reentry conditions. While the thermal protection systems are critical to the safety of the vehicle, finding damage in these structures presents a unique challenge. Impedance techniques will be used to detect the standard damage mechanism for one type of thermal protection system. The sensitivity of the impedance method at elevated temperatures is also investigated. Sensors are often affixed to structures as a means of identifying structural defects. However, these sensors are susceptible to damage themselves. Sensor diagnostics is a field of study directed at identifying faulty sensors. The influence of temperature on these techniques is largely unstudied. In this dissertation, a model is generated to identify damaged sensors at any temperature. A sensor diagnostics method is also adapted for use in developed hardware. The prototype used is completely digital, so standard sensor diagnostics techniques are inapplicable. A new method is developed to work with the digital hardware.
  • Thumbnail Image
    Considerations of the Impedance Method, Wave Propagation, and Wireless Systems for Structural Health Monitoring
    Grisso, Benjamin Luke (Virginia Tech, 2004-08-31)
    The research presented in this thesis is all based on the impedance method for structural health monitoring. The impedance method is an electro-mechanical technique which utilizes a single piezoelectric transducer as both a sensor and actuator. Due to the high frequencies of excitation used for the method, the sensing area for damage detection can be very localized. Previous work has shown that wave propagation can be added to systems already equipped with hardware for impedance-based structural health monitoring. The work in this thesis shows what happens under varying temperature conditions for a structure being monitored with wave propagation. A technique to compensate for temperature fluctuations is also presented. The work presented here is an initial study to directly correlate the actual amount of damage in a composite specimen with a damage metric indicated by impedance-based structural health monitoring. Two different damage mechanisms are examined: transverse matrix cracking and edge delamination. With both composite defects, a sample is interrogated with the impedance method before and after damage is introduced. The exact amount of damage in each specimen is found using radiography and compared with the health monitoring results. Traditional impedance techniques require the use of a bulky and expensive impedance analyzer. With the trend of structural health monitoring moving towards unobtrusive sensors which can be permanently placed on a structure, an impedance analyzer does not lend itself to these small, low power consuming requirements. In this thesis, an initial attempt to miniaturize the hardware is described. A prototype impedance-based structural health monitoring system, incorporating wireless based communications, is fabricated and validated with experimental testing on a number of different structures. The first steps towards a complete self-contained, robust structural health monitoring sensor are presented.