Browsing by Author "He, Long"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Study of Fluid Forces and Heat Transfer on Non-spherical Particles in Assembly Using Particle Resolved Simulation
    He, Long (Virginia Tech, 2018-01-16)
    Gas-solid flow is fundamental to many industrial processes. Extensive experimental and numerical studies have been devoted to understand the interphase momentum and heat transfer in these systems. Most of the studies have focused on spherical particle shapes, however, in most natural and industrial processes, the particle shape is seldom spherical. In fact, particle shape is one of the important parameters that can have a significant impact on momentum, heat and mass transfer, which are fundamental to all processes. In this study particle-resolved simulations are performed to study momentum and heat transfer in flow through a fixed random assembly of ellipsoidal particles with sphericity of 0.887. The incompressible Navier-Stokes equations are solved using the Immersed Boundary Method (IBM). A Framework for generating particle assembly is developed using physics engine PhysX. High-order boundary conditions are developed for immersed boundary method to resolve the heat transfer in the vicinity of fluid/particle boundary with better accuracy. A complete framework using particle-resolved simulation study assembly of particles with any shape is developed. The drag force of spherical particles and ellipsoid particles are investigated. Available correlations are evaluated based on simulation results and recommendations are made regarding the best combinations. The heat transfer in assembly of ellipsoidal particle is investigated, and a correlation is proposed for the particle shape studied. The lift force, lateral force and torque of ellipsoid particles in assembly and their variations are quantitatively presented and it is shown that under certain conditions these forces and torques cannot be neglected as is done in the larger literature.
  • Thumbnail Image
    A Study of Immersed Boundary Method in a Ribbed Duct for the Internal Cooling of Turbine Blades
    He, Long (Virginia Tech, 2014-12-08)
    In this dissertation, Immersed Boundary Method (IBM) is evaluated in ribbed duct geometries to show the potential of simulating complex geometry with a simple structured grid. IBM is first investigated in well-accepted benchmark cases: channel flow and pipe flow with circular cross-section. IBM captures all the flow features with very good accuracy in these two cases. Then a two side ribbed duct geometry is test using IBM at Reynolds number of 20,000 under fully developed assumption. The IBM results agrees well with body conforming grid predictions. A one side ribbed duct geometry is also tested at a bulk Reynolds number of 1.5⨉10⁴. Three cases have been examined for this geometry: a stationary case; a case of positive rotation at a rotation number (Ro=ΩDₕ/U) of 0.3 (destabilizing); and a case of negative rotation at Ro= -0.3 (stabilizing). Time averaged mean, turbulent quantities are presented, together with heat transfer. The overall good agreement between IBM, BCG and experimental results suggests that IBM is a promising method to apply to complex blade geometries. Due to the disadvantage of IBM that it requires large amount of cells to resolve the boundary near the immersed surface, wall modeled LES (WMLES) is evaluated in the final part of this thesis. WMLES is used for simulating turbulent flow in a developing staggered ribbed U-bend duct. Three cases have been tested at a bulk Reynolds number of 10⁵: a stationary case; a positive rotation case at a rotation number Ro=0.2; and a negative rotation case at Ro=-0.2. Coriolis force effects are included in the calculation to evaluate the wall model under the influence of these effects which are known to affect shear layer turbulence production on the leading and trailing sides of the duct. Wall model LES prediction shows good agreement with experimental data.