VTechWorks staff will be away for the winter holidays starting Tuesday, December 24, 2024, through Wednesday, January 1, 2025, and will not be replying to requests during this time. Thank you for your patience, and happy holidays!

Browsing by Author "Jorapur, Nikhil Sudhindrarao"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Design, Fabrication and Testing of Fiber-Reinforced Cellular Structures with Tensegrity Behavior using 3D Printed Sand Molds
    Jorapur, Nikhil Sudhindrarao (Virginia Tech, 2017-02-15)
    The overall goal of this work is to improve the structural performance of cellular structures in bending applications by incorporating tensegrity behavior using long continuous fibers. The designs are inspired by the hierarchical cellular structure composition present in pomelo fruit and the structural behavior of tensegrity structures. A design method for analyzing and predicting the behavior of the structures is presented. A novel manufacturing method is developed to produce the cellular structures with tensegrity behavior through the combination additive manufacturing and metal casting techniques. Tensegrity structures provide high stiffness to mass ratio with all the comprising elements experiencing either tension or compression. This research investigates the possibility of integrating tensegrity behavior with cellular structure mechanics and provides a design procedure in this process. The placement of fibers in an octet cellular structure was determined such that tensegrity behavior was achieved. Furthermore, using finite element analysis the bending performance was evaluated and the influence of fibers was measured using the models. The overall decrease in bending stress was 66.6 %. Extending this analysis, a design strategy was established to help designers in selecting fiber diameter based on the dimensions and material properties such that the deflection of the overall structure can be controlled. This research looks to Additive Manufacturing (AM) as a means to introduce tensegrity behavior in cellular structures. By combining Binder Jetting and metal casting a controlled reliable process is shown to produce aluminum octet-cellular structures with embedded fibers. 3D-printed sand molds embedded with long continuous fibers were used for metal casting. The fabricated structures were then subjected to 4 point bending tests to evaluate the effects of tensegrity behavior on the cellular mechanics. Through this fabrication and testing process, this work addresses the gap of evaluating the performance of tensegrity behavior. The overall strength increase by 30%. The simulation and experimental results were then compared to show the predictability of this process with errors of 2% for octet structures without fibers and 6% for octet structures with fibers.