Browsing by Author "Joshi, Prachi"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Design Space Exploration for Embedded Systems in Automotives
    Joshi, Prachi (Virginia Tech, 2018-04-16)
    With ever increasing contents (safety, driver assistance, infotainment, etc.) in today's automotive systems that rely on electronics and software, the supporting architecture is integrated by a complex set of heterogeneous data networks. A modern automobile contains up to 100 ECUs and several heterogeneous communication buses (such as CAN, FlexRay, etc.), exchanging thousands of signals. The automotive Original Equipment Manufacturers (OEMs) and suppliers face a number of challenges such as reliability, safety and cost to incorporate the growing functionalities in vehicles. Additionally, reliability, safety and cost are major concerns for the industry. One of the important challenges in automotive design is the efficient and reliable transmission of signals over communication networks such as CAN and CAN-FD. With the growing features in automotives, the OEMs already face the challenge of saturation of bus bandwidth hindering the reliability of communication and the inclusion of additional features. In this dissertation, we study the problem of optimization of bandwidth utilization (BU) over CAN-FD networks. Signals are transmitted over the CAN/CAN-FD bus in entities called frames. The signal-to-frame-packing has been studied in the literature and it is compared to the bin packing problem which is known to be NP-hard. By carefully optimizing signal-to-frame packing, the CAN-FD BU can be reduced. In Chapter 3, we propose a method for offset assignment to signals and show its importance in improving BU. One of our contributions for an industrial setting is a modest improvement in BU of about 2.3%. Even with this modest improvement, the architecture's lifetime could potentially be extended by several product cycles, which may translate to saving millions of dollars for the OEM. Therefore, the optimization of signal-to-frame packing in CAN-FD is the major focus of this dissertation. Another challenge addressed in this dissertation is the reliable mapping of a task model onto a given architecture, such that the end-to-end latency requirements are satisfied. This avoids costly redesign and redevelopment due to system design errors.