Browsing by Author "Keim, Steven Anthony"

Now showing 1 - 2 of 2
  • Thumbnail Image
    Optimization of Coalbed Methane Completion Strategies, Selection Criteria and Production Prediction: A Case Study in China's Qinshui Basin
    Keim, Steven Anthony (Virginia Tech, 2011-08-18)
    Advanced three-dimensional reservoir modeling was used to determine the optimum strategy for coalbed methane production in China's Qinshui Basin. Multiple completion strategies were analyzed for pre-mining methane drainage on the bases of economic, environmental, and mining-safety-based factors. Effective degasification in the Qinshui Basin is crucial to enhance the health and safety of the underground mining workforce and to decrease carbon dioxide equivalent greenhouse gas emissions. Active, large-scale degasification wells in the region include hydraulically stimulated vertical fracture wells and multilaterally drilled horizontal patterns, with the latter much less common. Reservoir modeling concludes that despite their limited implementation, horizontal coalbed methane drainage wells offer the benefits of faster reservoir depressurization, high gas production rates, and faster recovery times than traditional vertical fracture wells. Coupled with reservoir modeling results, discounted cash flow analyses show that high drilling density multilateral horizontal patterns are the most financially feasible degasification strategy in the Qinshui Basin, albeit a higher initial capital investment compared to traditional vertical fracture wells and lower drilling density horizontal patterns. Additionally, horizontal wellbore designs can be altered to account for varying permeability, enhancing the productivity of methane from reservoirs exhibiting permeability values less than 1 millidarcy. Furthermore, modeling suggests that proper orientation of select horizontal wellbore patterns is crucial to optimize recoverable reserves. Finally, a function was derived to represent the production rates of horizontal coalbed methane wells as a function of time. Analysis of the function's validity to actual production data and simulated production data suggest that it is most applicable in gassy coal seams up to 10 feet in thickness. The production rate curve was transformed to an analytical model, representing a function of well geometry and coal permeability as applied to other geological conditions of the Qinshui Basin. Scientific contributions associated with this research include: An in depth study of degasification associated with the Qinshui Basin's low permeability coals; The methodology for assessing environmental, safety and economic benefits of coal degasification; The relationship between lateral spacing and permeability to maintain substantial gas production rates; An improved production model to describe the entire producing period of coalbed methane wells.
  • Thumbnail Image
    Scanning Methods as Monitoring, Verification, and Accounting tools for CO₂ Sequestration in Unconventional Gas Reservoirs
    Amante, Joseph David (Virginia Tech, 2015-09-16)
    Unconventional gas reservoirs in carbon dioxide sequestration activities is a relatively new and unexplored concept currently undergoing pilot scale testing. Sequestration has the potential for enhancing gas recovery while mitigating carbon dioxide to long term storage structures. Due to the extremely complex systems associated with these unconventional reservoirs, modeling becomes difficult to predict accurately. This thesis presents methods to increase the confidence of inferred parameter testing for unconventional reservoir sequestration in both seam coal bed methane wells and a shale wells. Various tests include the use of computed tomography coupled with Avizo modeling software, inductively coupled mass spectrometer fluid transport analysis, pressure transient build tests, liquid level detection, and desorption analysis coupled with cleat image analysis. Analyses of coals performed by both environmental scanning electron microscope (ESEM) and micro CT demonstrate that distributions of cleat porosity in coals are anisotropic and not correlated to the seam depth or location. ESEM is used with micro CT scanning to verify the results before and after the impregnation of the carbonic acid. The micro CT data in Avizo Fire© was used calculate an increase in cleat permeability by 25%. The increase of major flow pathways is caused by the dissolution of carbonates. Changes in the structures were observed qualitatively through ESEM and micro CT and quantitatively through Avizo and inductively coupled mass spectrometry. The results of comparative study between the cleat structures and the desorption of various seams indicate a trend in the cleat porosity and the desorption rate of the coals as well as the cleat porosity and the total gas in various seams.