VTechWorks staff will be away for the Thanksgiving holiday beginning at noon on Wednesday, November 27, through Friday, November 29. We will resume normal operations on Monday, December 2. Thank you for your patience.

Browsing by Author "Kim, Jong Wan"

Now showing 1 - 1 of 1
  • Thumbnail Image
    Back to Back Active Power Filter for Multi-Generator Power Architecture with Reduced dc-link Capacitor
    Kim, Jong Wan (Virginia Tech, 2020-01-30)
    Multi-pulse converters have been widely used for a multi-megawatt scale power generating system to comply with harmonic regulations. Among all types of multi-pulse converters, a 12-pulse converter is the most widely used due to the simple structure, which consists of a delta-delta and a delta-wye phase-shift transformer pair and it effectively mitigates undesirable harmonics from the nonlinear load. In the early 2000s, a shunt type passive front-end for a shipboard power system was proposed. By shunting the two gensets with 30° phase angle difference, a single phase-shift transformer effectively eliminates 5th and 7th harmonics. It achieves a significant size and weight reduction compared to a 12-pulse converter while keep the comparable harmonic cancellation performance. Recently, a hybrid type front-end was proposed. On top of the passive front-end, 3 phase active power filter was added and an additional harmonic cancellation was achieved to further eliminate 11th and 13th harmonics. However, the performance of both the passive and hybrid type front-end are highly dependent on the size of the line reactor in ac mains. A back to back active power filter is proposed in this dissertation to replace the phase-shift transformer in the multi-generator power architecture. The proposed front-end does not include phase-shift transformer and the size and the weight of the overall front-end can be significantly reduced. Due to the active harmonic compensation, the back to back front-end achieves better power quality and the line reactor dependency is improved. The number of required dc-link capacitors is reduced by half by introducing a back to back configuration and the capacitor size is reduced by adjusting the phase angle difference of genset to cancel out the most significant voltage harmonics in the shared dc-link bus. The overview of the existing shunt type front-end is provided and the concept of back to back active power filter is validated by simulation and prototype hardware. The comparison between existing front-end and the proposed front-end is provided to highlight the superior performance of back to back active front-end. The dc-link bus current and voltage ripple analysis is provided to explain the dc-link ripple reduction mechanism.