Browsing by Author "Liu, Huifang"
Now showing 1 - 2 of 2
Results Per Page
Sort Options
- Acoustic Emission Wave Velocity Measurement of Asphalt Mixture by Arbitrary Wave MethodLi, Jianfeng; Liu, Huifang; Wang, Wentao; Zhao, Kang; Ye, Zhoujing; Wang, Linbing (MDPI, 2021-09-13)The wave velocity of acoustic emission (AE) can reflect the properties of materials, the types of AE sources and the propagation characteristics of AE in materials. At the same time, the wave velocity of AE is also an important parameter in source location calculation by the time-difference method. In this paper, a new AE wave velocity measurement method, the arbitrary wave (AW) method, is proposed and designed to measure the AE wave velocity of an asphalt mixture. This method is compared with the pencil lead break (PLB) method and the automatic sensor test (AST) method. Through comparison and analysis, as a new wave velocity measurement method of AE, the AW method shows the following advantages: A continuous AE signal with small attenuation, no crosstalk and a fixed waveform can be obtained by the AW method, which is more advantageous to distinguish the first arrival time of the acoustic wave and calculate the wave velocity of AE more accurately; the AE signal measured by the AW method has the characteristics of a high frequency and large amplitude, which is easy to distinguish from the noise signal with the characteristics of a low frequency and small amplitude; and the dispersion of the AE wave velocity measured by the AW method is smaller, which is more suitable for the measurement of the AE wave velocity of an asphalt mixture.
- The Effect of Cross-Linking Type on EPDM Elastomer Dynamics and Mechanical Properties: A Molecular Dynamics Simulation StudyWang, Yajian; Liu, Huifang; Li, Pengpeng; Wang, Linbing (MDPI, 2022-03-24)The cross-linking structure of the Ethylene-propylene-diene monomer (EPDM) is made up of a number of cross-linking types, including carbon atoms from the main chain or monomer and ether crosslinks formed during degradation. Through molecular dynamic simulations, the contribution of each type of cross-linked structure to the dynamics and mechanical properties of EPDM, the study’s focus, were investigated. Cross-linking between the tertiary carbons of two main chains, cross-linking at the monomer’s unsaturated position, ether cross-linking after oxidation, and other combinations of target cross-linked carbon atoms from different positions, totaling eight types of cross-linked types, were mixed with EPDM free chains in a 1:1 ratio to form eight types of cross-linked EPDMs. These varieties of cross-linked EPDMs were then compared to an uncross-linked EPDM in terms of density, radius of gyration, free volume, mean square displacement, and uniaxial tensile stress-strain curves. It was found that the cross-linking was always proven to have a favorable influence on mechanical characteristics; however, the relaxation inhibition effect varied. The cross-linking between the diene monomer at the C9 position resulted in a more flexible molecular shape and was more than double the free volume of the uncross-linked EPDM, resulting in an improved diffusion ability. The ether cross-linking produced by the oxidation of the side chain cross-linking improved the positive contribution to stiffness and enhanced the inhibitory impact on diffusion properties, whereas the main chain cross-linking had the opposite effect. The research presented in this study leads to a better knowledge of the microscopic aspects underlying EPDM performance.